Trracer body with Phantom feed and Spyder threads

[DieManInTheRough]

So i'm real cheap, and I've always wanted a phantom. This thing is a work in progress. Have test printed, Hammer,bolt,and pump slots are spot on, Spyder threads because I couldn't find any other female threaded model.
Thoughts, questions, idea's? Anyone have Autococker or Ion threads in a female pattern modeled?
Future plans to add ASP style detent holes, or VL/spyder style detent alongside the feedneck.

https://www.thingiverse.com/thing:6113800

reuploaded to fix missing hole.

[Morgenstern]

The funny thing is for me and a lot of people, starting out on a Trracer meant Phantoms were a disappointment. If there were better barrel and feed options, you can’t beat how smooth a nice factory Trracer is.

[DieManInTheRough]

My frankenTrracer, (started life as an ACI hornet.), shot fine back in the day('11-'12?), this is for modern convenience. Center feed,better barrels and NO NAIL POLISH!

[BigRed]

There's a market for these with cocker threaded bodies. On MCB 2.0 there was a run of Trracer bodies with cocker threads. I'd be a customer with a centerfeed option screw hole like the Phantom.

[DieManInTheRough]

If I can find/ or someone can model the female autococker threads I'd be stoked to see a remix or model it in myself. I lack the capability to model threads.

[nnolt89]

Any update on this? So many old Trracers out there taht could be brought back to life.

[kingmt]

According to this thread https://www.pbnation.com/showthread.php?t=803907 autococker barrel threads are 15/16-20 and spyder threads are M22-1.5

[Snowpuff]

Yo.... how do people make threads or get the model for threads ??

[XEMON]

Your cad software should have a threads section where you can make a bunch of pre design ones, or you can always design your own profile and spiral cut/extrude it ...

[Nickabeans]

Has anyone printed one of these? Are they safe to play with?

[jetenginekyle]

Has anyone printed one of these? Are they safe to play with?

I haven't printed this one specifically but have played with other printed traccer bodies. They are perfectly safe as the pressure is contained within the valve body, which is metal, up until its shot. When fired the pressure within the body is both pretty low and also doesn't stick around very long at all.

[Snowpuff]

Yes I play with all 3d printed double barrel tracer except the internals of course. I make body pump handle stock and forward phantom feed, ac threaded and printed freak inserted barrels

https://youtu.be/7ITP0Ncj4YQ?si=yebcg8rItA5E4YpC