Probably the wrong place to ask a nasty question

[Chemical-x.....ahain]

Does anyone know how many shots a nasty painter gets on a 12 gram?

its not a gun to rapid fire with so the gas will get its best efficiency.

[Jordan]

10 if you're lucky. (So 20 total - 10x each barrel.)

Nastys are not gas efficient.

[Chemical-x.....ahain]

Crud, I was hoping for about 15.

Thank you Jordan. I picked up a 4.5k 17ci bottle and that gets me in the neighborhood of 130-150

[XEMON]

I confirm 8 to 10 shot top on a 12g

[Chemical-x.....ahain]

Has anyone messed around with making a double 12 g assembly and not the rap4 tube variant or the BE cap style version?

[Jordan]

Has anyone messed around with making a double 12 g assembly and not the rap4 tube variant or the BE cap style version?

Do you mean, like a double 12ie setup like on the Sheridan rifles, or just a multi-12gram changer?

[JeeperCreeper]

Oh so I'm pretty much on par with everyone else with the pirate double. 12 shots, first few around 250-260, last one was 191. I believe it also chronos the slower ball, so there's a chance the other is going just a touch faster because of paint inconsistencies, but double Freak bore helps. I'm using a P series valve.

[Jordan]

Ar 12 you're still shooting 24 paintballs.... pretty decent for a Sheridan. You're doing really well if you're getting that out of a double (IMO).

P-series suffer from a shorter hammer travel as well... K-series have a slightly heavier hammer and much longer travel, so easier to get velocity and efficiency from.

[JeeperCreeper]

I dimpled the hammer face to gain a couple extra mm of hammer throw. Stock valve spring, and the older style hammer. I also put an rva on it with a PPS length spring. The RVA is backed out to compensate for the length. The valve core is also opened up to the absolute maximum. I could definitely gain fps with tighter inserts, but I don't have a pair of anything smaller than .684.

[Chemical-x.....ahain]

I was curious if anyone had tried to fabricate a 12 gram assembly that pierces 2 at a time.

I've got a few ideas kicking around on how to Pierce 2 and I think check valves on each piercer would be a good integration.

[netsurferdude2]

McMurray did a dual pierce 12gram in KPs. They punctured both and pressurized the lower tube. I have one of these assemblies but never really used it on a gun.

Bacci did a video: https://www.youtube.com/watch?v=lHRuZjcvibw

[chplnstone]

iirc k1's came with dual 12vie setups, hence the bleed valves in front of the trigger guard... though many were converted to bulk fill

[Trbo323]

Longer barrels, xl inserts, tight bore , warm weather be satisfied with 260 and make a virgin sacrifice

Might be able to squeeze a few more shots out of each 12ie

Sent from my motorola edge 5G UW (2021) using Tapatalk

[Chemical-x.....ahain]

I've been toying around with it and I'm not quite finished bit here's my current.

[Jordan]

Pretty cool! I thought of doing something similar with one of my Hurricanes.