A Conversation About Tools

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • pirhana92
    replied
    I used to have an autococker valve tool in my kit, o-ring picks and a small pair of needle nose pliers.

    Leave a comment:


  • Jonnydread
    commented on 's reply
    I reckon you’re using shitty ones. I’ve had the same set for years and that’s never happened to me, worst I’ve experienced is some bending on the thinner ones.

  • Tinybear
    replied
    Don’t really have paintball specific tools more than the Allen keys and screw drivers I keep in my paintball bin.

    If I ever need more tools I’m a mechanic by trade and have complete tool boxes and kits and both my house and my old house and then obviously my majority of tools at my work.

    Leave a comment:


  • Euphie
    replied
    I have a set of long Allen wrenches in addition to the normal ones and I am surprised how often the long ones help. Aside from common tools I find myself using punches, taps, dies, strap wrenches, and files.

    I use the punches on trigger pins, if the pins are too worn out I will use the tap set to create threads for a set screw to hold the pin in.

    I don’t have a mill or lathe so right now if I need to make a part I have to use a dremel to rough out the shape then use a file to slowly create the specific dimensions I need. It is super time consuming and while it works okay for milling it really sucks for stuff I would do on a lathe.

    The rubber strap wrench is a godsend to remove stubborn regulators and such.

    I really wish I had a lathe, and some way to create new seals

    Leave a comment:


  • Trbo323
    replied


    Originally posted by Hellion360
    Reg tester
    An old on/off bleed ASA and a 0-1500 psi gauge with a large face makes a great tester

    Originally posted by Jonnydread
    Ball-end hex keys are essential for paintball.
    I've actually avoided ball end. In my experience the balls just break off over time

    Sent from my Moto Z (2) using Tapatalk

    Leave a comment:


  • XEMON
    replied
    Don't underestimate a nice work area, a nice flat table with a towel on top can do the trick, but some nice bins are my favorite ...

    Leave a comment:


  • Trbo323
    replied


    Originally posted by Cunha
    have a correct wrench for norgen and cammozi macro fittings in the tool bag.
    What size are these?

    Sent from my Moto Z (2) using Tapatalk

    Leave a comment:


  • flyweightnate
    replied
    A hex standoff stuffed in a socket on an extension is a really good cocker valve tool, in a pinch. I think I drilled the threads out of it first, for extra clearance.

    A clamping crescent wrench is great. Like a flat-jaw vise grip.

    Magnetic trays. In my experience, the magnet is mostly to keep myself from knocking it over.

    Vibratite. A great, gooey thread sealant and locker.

    Leave a comment:


  • Trbo323
    replied
    I have a few odd balls for you

    1) cp reg removal tool. It's like $40 and works with the majority of regs out there

    2) I made my own muffler, you need a barrel you don't care about, 2 sizes of PVC, one to fit tightly over the barrel and another to fit over that PVC with some space in between. Drill multiple small holes in each PVC. Fit the small one over the barrel electrical tape to barrel and cover any exposed porting that the PVC does not cover. Plug the end of PVC with tape. Slide larger PVC over smaller, put rags, preferably cotton in between the two PVC. Seal both ends with more electrical tape and bam, one muffler

    3) soft jaw vice grips are good for getting stuck regulators apart

    PSI Woodworking PKDISGRIP Soft-Grip Pliers Pen Kit https://www.amazon.com/dp/B07DKXVVQX...ing=UTF8&psc=1

    These are not the best, some big regulators don't fit. What do you guys use when you need to get round objects to turn?

    4) I specifically use bondhaus Allen wrenches, they hold up really well over time

    5) jewelers screw drivers are useful for all kinds of things

    Cigar cutter for macro. Works amazing

    Sent from my Moto Z (2) using Tapatalk


    Leave a comment:


  • Jordan
    commented on 's reply
    I have a set, just can't find 'em. They WERE nice when I used them.

  • Cdn_Cuda
    commented on 's reply
    Actually have a drill press and if I ever get around figuring it out I have a lathe. Just need to take the plunge and start using them and modifying bodies.

  • Hellion360
    replied
    Vice with rubber grips
    Thin wrenches for pneumatics
    Precision sockets for barbs
    Polishing wheel
    Reg tester

    These get a ton of use for me

    Leave a comment:


  • Jonnydread
    replied
    Ball-end hex keys are essential for paintball.

    Leave a comment:


  • Jordan
    replied
    Strap wrenches are great for pulling stubborn components apart without scratches.

    I think the best thing I've bought was a drill press... I use it for everything, it seems.

    Leave a comment:


  • Cdn_Cuda
    commented on 's reply
    I like the pod idea. Have a box full of them kicking around. I’ll try that!
Working...