A Conversation About Tools

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • autococker04
    commented on 's reply
    I’ve had pretty good results sticking the barrel in a towel lined pod and covering the feedneck

    Also, squeegee in barrel, pressed against a wall so it won’t shoot out.

  • Cdn_Cuda
    replied
    I use a towel to muffle, but generally work when kids are asleep and right by tenant’s room. Mostly Tippmanns and cocker and Spyder clones. Thinking a muffler and a sweatshirt/towel would work best. Wake kids = angry wife = sleeping outside.

    I do have a bench mounted vice, wrenches etc. I bought a nice set of ball-ended Allan keys as well.

    wWood dowels are a good call. Have a few well abused wooden squeegees for that. A soft faced hammer/mallet is likely a good purchase as well.

    Leave a comment:


  • Seajay
    replied
    Depends on what you are working on. %98 of stuff you just need allen wrenches and something to grip with.

    My tools...
    Wood dowels, a plastic/rubber head hammer, and correctly fitting wrenches.
    Chrome allen wrenches are my main tools. I find they are gentler than the black coated ones.
    I try not to use vice grips
    Vice.
    Fire, something to kill off our friend Loctite
    O-ring pickers

    I was looking at tank valve tools, I'll probably just make something for the vice out of wood though.
    I don't have a cocker valve tool yet...

    A bucket with a thick towel works very well as a muffler/ballcatcher

    Leave a comment:


  • Cdn_Cuda
    replied
    Bought a sent of smaller pliers recent for various destructive work. Need to grab an Xacto knife for removing houses off barbs

    Leave a comment:


  • Cunha
    replied
    My favorite tools are a bench vice (bigger the better), a hack saw, and a file.

    For everything else its just allen wrenches and its nice to have a correct wrench for norgen and cammozi macro fittings in the tool bag, and some pliars just in case you wanna see the world burn or need to pull something small out of a hole.

    Leave a comment:


  • Toestr
    replied
    If you're ok with taking the fittings off the tank off before you remove the reg, you can try this:
    https://youtu.be/eX2KrUP46v0
    You can also put a piece of hose cut in half if you don't have a bit/hole saw that's the right size.

    For a muffler maybe just use a barrel swab or stuff a crappy old barrel with cloth.

    Sent from my Pixel 4a using Tapatalk

    Leave a comment:


  • Cdn_Cuda
    started a topic A Conversation About Tools

    A Conversation About Tools

    I want to know what tools you use to work on paintball guns.

    I know the basics such as picks, valve tools, Allan keys but what about more specific gear like air tank valve removal tools, barrel mufflers etc.

    What tools are you using? What tools did you buy and never use?

    I’m looking at grabbing a tank valve removal tool and maybe a muffler as my workshop is beside my tenant’s bedroom.
Working...