Multiple air tanks

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Grendel
    replied
    Does your Phenom work fine off the 77 cuin bottle to begin with and the current on gun regulator setting? If yes to that question theoretically it will work but at a pressure of 550psi minus the pressure needed to overcome the fill nipple check valve, so maybe lets for argument say 25 psi so at 525psi in your 13 cuin bottle. If your Phenom will work normally at around 525 psi down to your 350 psi marker operating pressure then yes it will work but not efficiently (you are now using 3 separate regulators now plus the delta in pressure to overcome the fill nipple check valve. Kind of a cluggy setup though and I'd just run it off the 77 cuin bottle and take out the complexity. The two bottles will eventually build an equilibrium with a delta between the bottles of what ever pressure it takes to override the check valve and will work their way down in pressure until your on gun regulator no longer can do its job.

    Leave a comment:


  • Shaftski
    commented on 's reply
    Pressure might be OK but overall system air flow would suck. I'd expect to see shootdown.

  • Seajay
    replied
    Ok but just for additional clarity, I'm not filling the 13ci, I'm just using it as a passthrough to the 77ci.
    The 13ci is acting as my stock.

    Leave a comment:


  • Handy
    replied
    I have done something similar before while trying to test out a tank regulator. The tank being filled, even when smaller usually only got up to 1000psi or so. In hindsight it was probably only up to the output pressure of the giving tank. I think a SHP regulator on the 77ci would probably get the best results as stated above.

    Leave a comment:


  • Seajay
    replied
    Some clarifications.. I'll only connect the 77ci to the 13ci when I use it all up.

    13ci is empty
    Connect the 77ci to the 13 ci fill port
    13ci connected to the Phenom ASA.

    77ci is a Ninja Pro 2 reg.

    77ci 550psi -> 13ci 0psi -> (let's say) 350psi operation pressure

    The fill port on the 13ci is just a plunger, no spring, output pressure is what seals it normally.
    The 13ci reg is a FS one, I don't actually know what reg it uses. stock ~800 psi.

    I have the option to steal some shim from another Ninja tank I have and try to increase output pressure on the 77ci if necessary.

    Leave a comment:


  • Ecapnation
    commented on 's reply
    I'm confused then....

    You're trying to fill the 13ci from the 77?

  • Trbo323
    replied
    Originally posted by Ecapnation
    Not going to work....

    Plus.... Two different our puts will give you weird velocity issues
    Ummm...no

    Output pressure will be fixed because of the 13ci tank, and even if it's not the phenom has it's own regulator to step down the pressure from whatever the input is

    Sent from my Moto Z (2) using Tapatalk

    Leave a comment:


  • Ecapnation
    replied
    Not going to work....

    Plus.... Two different our puts will give you weird velocity issues

    Leave a comment:


  • djeclypse
    replied
    Also don't forget, except for the Powerhouse reg which has a separate air path for filling, the rest of the tank regs on the market use the same path for filling and feeding out into the marker. Therefore you'd be trying to fight against the stream to fill the attached tank while it is feeding the marker. I'm not expert but that seems like a difficult task.

    Sent from my SM-G892U using Tapatalk

    Leave a comment:


  • Trbo323
    replied
    Yeah I forget who did it but Adobe guys were basically trying to make a "juggernaut" setup and shoot the most paint a single player could shoot without requiring help from other players, they did it using a g6r, tank on the marker and 2 tanks in remote but when they first tried it all 3 tanks were SLP tanks to hopefully help the g6r but what they found was the 2 in remote would not fill the tank on the marker, they switched out the 2 remote tanks for SHP tanks and the system worked

    I'm trying to find the article but can't at the moment, I want to say he shot line 30 something pods. It's pretty nuts

    Sent from my Moto Z (2) using Tapatalk

    Leave a comment:


  • BrickHaus
    replied
    I wonder if you put a gauge port adaptor asa extender on your asa. Then ran the remote output tank do one of the gauge port. That way it wouldbasically be both outputs wprking agqinst eachother. Id think the 13k would drain down to 500 quick, then they would equalize more or less as they drained.

    Leave a comment:


  • Shaftski
    replied
    Won't work very well if I understand what you are saying. If you plan to put remote line into fill port of the 13ci bottle that is. The 13ci bottle reg is going to see an abnormally low input pressure in that case, it's expecting 3-4.5K psi input but will only see 550psi input. It will have a high pressure spring, so final output pressure would be really low. Lower input pressures would not move the fill valve on the 13ci very well either.

    Leave a comment:


  • Seajay
    started a topic Multiple air tanks

    Multiple air tanks

    So I have this weird setup going on and I think it will work.

    I plan to use a ~800psi ouput 13ci on my Phenom x7, which shoots 300-350 psi. I will bring with me my 77ci bottle, but this one has a 550psi output reg setup on it.
    The plan is to use a remote to connect the 77ci to the 13ci when the small bottle is out of air, to stay on the field longer.

    Does this work? I'll basically be shooting 550psi from the 77ci through the 13ci, acting as a big expansion chamber?

    I don't think the fill valve would be an issue since I'm stepping down in pressure as I go, right?
Working...