Welcome to MCB! We are the most popular and active paintball forum found on the internet! Thank you for stopping by.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Probably got a knock off one. Sconi had some made that were sold cheap because the front port was off set and the machine work was ruff. Was it dust black?
Far to popular to have issues I would assume. I haven’t used one tho. It’s a very simple design what could got wrong with it.
Why would you assume this? Gorilla air also had a line of tanks in the late 00s, they were very popular because of the price, the regulators also had a tenancy to implode
They are also the ones who typically do not put a output pressure burst disk on their tanks. So when the regulator implodes, if the regulator seat is not fully seated, you are putting straight tank pressure into your marker.
As a rule of thumb, I don't touch gorilla air products.
Sent from my motorola edge 5G UW (2021) using Tapatalk
I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.
There are a bunch of replica GA regs and ASA’s on the market Those are the ones you got to watch out for. The Myth was knocked off so much even GA couldn’t tell what ones were fakes the got stuck fixing a bunch of regs they didn’t produce. It was a good reg it was just noisy (ping). I have one that I use on a 9ci because it only adds a 1/2” to the bottle. It came off a bottle from the early 2000’s only thing I have done is change out the burst disk to to 3k spec and shim the pressure up to 825ish. It’s not a bad reg I have used worse.
Comment