HPR fittings besides 90*

[desertT1]

I’m swapping ASAs on this Sniper and with the variety of steel braided lines I have or have picked up I can’t make it work without a pretty harsh kink. I need something a little more open than a 90* elbow, but does that even exist? Haven’t found anything at ANS or autocockerparts.

[ChuckLove]

45* macroline fittings exist. I bought one from docfire's website but that is not currently operational.

[desertT1]

Hold that thought. I had been finding stuff with something like a 300 PSI rating, but I found something with a 1200 PSI rating. Ordered those and will see how they fit.

[Jordan]

45° brass elbows also exist, if you prefer to retain the SS braid.

[evilfishsticks]

Paintball wizard has 45 degree fittings in stock for 4 bucks. When i got back into paintball a couple years ago i went to the local paintball shop and dug through their parts bins for a handful of them.

https://www.paintballwizard.com/products/45deg

[Roger7pball]

https://www.universalair.com/shop/05-72-4-2-nickel-plated-1-4-hose-1-8-npt-45-degree-swivel-dot-approved-fitting-46#attr=

1000psi

[Myrkul]

It's just 1/8" NPT (Nation Pipe Threads). There are dozens if not hundreds of options that would work. You could even whip somthing up from ace Hardware. God knows I've done it. Personally I'd go with a 45 degree street elbow like this: https://factorysupplyoutlet.com/stre...IaAm3HEALw_wcB

[Brokeass_baller]

*National Pipe Taper 👍