Welcome to MCB! The most popular and active paintball forum on the internet. Thank you for stopping by!
If this is your first visit, please take a moment to check out the FAQ by clicking the link above. You will need to register before you can post. Simply click the Register link above to get started.
To begin browsing, select a forum from the list below.
The lower one has raw edges, which would indicate that it was a level 5 barrel that was converted to level 7. That dates it to '92.
I've cut one before to make a cocker adapter. I didn't check the original bore. It turned out that the original was not round, or concentric to the outside. So watch that.
I know there were quite a few individuals who took their barrels to the old lathe and machined the ends off.
They felt the pinging gave their position away easier on the field, but that was back in the old 10 man days.
I believe AGD stopped supplying crown points with the standard markers later on as a cost reduction.
There's so many of these out there, cut away! I had someone cocker-thread one for me way back when.
I'd buy a freak-tip version if they became available again.
Comment