Nelspot 007 Ball Detent

[acrewofone]

I either have to sell it, or start using it!

What is a good ball detent setup for a Nelspot 007? (it does have the removeable barrel)


nelspot_8.jpg nelspot_2.jpg

[JeepDVLZ45]

Maybe someone can 3D print you some fingers that will fit it.

[RedLeaderSB]

For preventing rollout you can machine an eclipse detent under the frame

[Toestr]

Is it cocker threaded? A freak/ifit insert will work for rollouts. Is an anti double feed necessary with the ramp into the barrel?

[Jordan]

Definitely - it doesn't happen every time but my 007 double feeds intermittently. I've Freak-bored it but plan on installing some type of rubber nubbin-style detent to stop the 2x feeds.

[appleguy]

For preventing rollout you can machine an eclipse detent under the frame

Whoa... like the ASP detents for a Phantom?? I never considered that... but I guess it would work?

[acrewofone]

Is it cocker threaded? A freak/ifit insert will work for rollouts. Is an anti double feed necessary with the ramp into the barrel?

No, the removal barrel slides on and is held with a set screw.

[XEMON]

What about making a set of different ID?
Or make a sleeve to fit freak insert?

[Handy]

Removeable barrel in this instance is a little misleading. It's mainly a sleeve that slides over the inner barrel that allowed for extensions. Reducing the ID would be a no go. Something like the ASP mod for Phantoms would be the best bet without a LOT of custom work. I believe Doc offers it (making the 007 cocker threaded that is)

[XEMON]

thanks,
I thought the sleeves went all the way to the breach ...

[Socalpumpballer]

I just stack tiny pieces of electrical tape where the ball sits in the barrel to prevent roll outs. Hasn’t failed me yet

[RAZRBAKK]

I always see this suggested but every time I try, I just shoot the electrical tape out on the first or second shot.

[XEMON]

Try nail polish 👍

[Socalpumpballer]

The barrel has to be completely oil free and dry. Electrical tape is pretty sticky so it’s shouldn’t shoot out if it’s adhering

[acrewofone]

I just stack tiny pieces of electrical tape where the ball sits in the barrel to prevent roll outs. Hasn’t failed me yet

How about a drip of hot glue, the kind that dries to a softer rubbery texture.

[Socalpumpballer]

Too thick and won’t stick to metal. Plus if it’s not flat you’re going to add spin

[markdem]

I would try something like this for double feeds

[Jordan]

I would try something like this for double feeds

The body tube is too thick, I think. I've had trouble adapting that style of detent to anything other than stock Sheridan barrel tube.

[XEMON]

I've made some 3d printed one that looks like the spider/ego ones, but held in place like the Palmer's. They work great 👍