Pressure Tester for Reg on a bottle?

[XNine]

Hey, I was wondering if anyone knows of a good pressure gauge that I can simply screw on to a reg that's on a full bottle to test the output pressure of the reg? I've looked at the big PB stores and the only thing I've found was a mini bottle that you screw the reg on to.

Thanks for any input you have!

[nak81783]

A remote of your choice, preferably with an off/off knob, slide check, and QD, and proper fittings/adapter/nipple to this gauge.

https://www.amazon.com/gp/aw/d/B07FB38G3R?psc=1&ref=ppx_pop_mob_b_asin_title

You can move the slide check on and off to get a new reading and SOMEWHAT see recharge rate, although refresh rate of the gauge itself likely does not fully represent the regulator’s capability.

[Brandon]

EZ Pressure Tester - Standard

But you would still need a way to supply the reg with air from your tank. I made one at home using two old on/Off asa, some macro line and a gauge. Serve the same purpose but it's not as pretty as the Inception one.

[superman]

I use the EZ pressure tester and use a different gauge rated for higher pressure.

[Walker]

I built one out of a remote ASA with a male QD on the output and a push button bleed. I put a female QD on three gauges and switch back and forth as needed. 200psi, 800psi, and 1500psi

You can screw a bottle into the ASA, an HPR into the ASA, or use an adapter that will take a macroline, and another that will take a Cocker LP hose and screw one of those into the remote ASA.

I also found an AirAmerica Guardian on eBay for $20....