Tracer pump arm screw thread I.d

[Snowpuff]

Hey so one of my tracers bolts is so badly worn down that the tigger sear slips right off (both sides) so I'm going to drill another hole ... any one know what the thread I.d on the pump arm screw is??
Thanks.

[DocsMachine]

They're 10-32.

Doc.

[Snowpuff]

Ya welI I fucked them up already put the wrong tap in....
I'm no machinist...just some dick head with a drill...

But... I got some of these

[Snowpuff]

[XEMON]

I have a stash of those pump arm screws if you need some 👍

[RAZRBAKK]

Hey I need a few of those. I'll PM you.

[Snowpuff]

What do they look like? The same?

[XEMON]

Same ones 👍

RAZRBAKK, 👍

[Chaos]

Hey so one of my tracers bolts is so badly worn down that the tigger sear slips right off (both sides) so I'm going to drill another hole ... any one know what the thread I.d on the pump arm screw is??
Thanks.

See if you can snag a set of the stainless ones that came on the Razorback, same size and shape just better material

[RAZRBAKK]

Something I've dealt with recently is a much shittier trigger pull when using non-trracer specific pump arm bolts.

One Trracer had Ranger style bolts on it and they allow the bolt to come forward ever so slightly more, causing a binding in the trigger/sear.