What makes a Merlin cocker so special?

[Masonhd81]

What’s the hype behind Merlin cockers? Isn’t the lower tube different? Unsure but they’re expensive

[Psycho91]

Merlin's also aren't milled on cnc machine their extruded or something like that right, I could be wrong

[flyweightnate]

Extruded, milled, then honed.

The first real 11/16" lower, and well made; it's rarity/ history/ quality all in one.

[automeister]

Many take a different valve and feature a larger valve chamber in an effort to lower operating pressure. As far as hype goes I think a lot of it is nostalgia and the fact that they are recognized as "cool" within the community. Once something is bestowed with the honor of being fashionable and desirable it is hard to shift away from that. That said, I dig them.

[Blackmagic71]

Once something is bestowed with the honor of being fashionable and desirable it is hard to shift away from that.

It went something like this….

[Blackmagic71]

The inverse obviously being the ceremonial “casting into the pit of despair” for the markers deemed uncool.

[Magmoormaster]

lol but the PB guns were actually pretty bad. Trilogies, on the other hand...

[superman]

Merlin autocockers are a little different in that they have are not just normal autococker bodies that are bored to 11/16.
They are also thicker on the bottom and bored from front to the back. They use a different style front block that lowers to 3way to match the thicker bottom of the body and larger banjo bolt. The banjo bolt also has a spring perch that extends in the body to hold the valve spring.

merlins also use a slightly larger diameter bolt and often times evo length. Most use a pre2k style ivg or later aka made a threaded aluminum plug that you could adjust the tension based on set positions.
Some have pressed in feednecks and some are threaded for aka style threads.

Overall they are nicely built, lower pressure and hard to find.

[Meleager7]

They are crap. Whoever has a Merlin should just sell it to me dirt cheap, so I can properly dispose of it for you!!!

[superman]

This thread needs more pictures.

Splat Attack Revenge v2 Inline (inline has the timing rod connect to the top of the trigger plate through a slot in the top of the frame. see the 2 front frame screws and lack of timing rod hole.