System x pneumatics rebuild

[Psycho91]

Is there a rebuild kit out there for these or does someone know what's all needed to rebuild one of these

[Blackmagic71]

I think a lot of their stuff was pretty similar to WGP with some different milling. It wouldn’t surprise me if the standard autocockerparts.com rebuild kit would work.

https://autocockerparts.com/autocock...omplete-build/

I’m just guessing though.

Can you disassemble everything and get some pictures?

[Psycho91]

If I remember yeah I'll get pics later today, IV never rebuilt an lpr but I guess it shouldn't be any different then a hpr

[Trbo323]

I know I've rebuilt one so it should be standard sizes.

This sounds like a good excuse to put together your own o ring kit

Sent from my motorola edge 2024 using Tapatalk

[Psycho91]

This is what the guts look like, looks like a shrader valve kinda

And the 3 way shaft is huge

[latches109]

003 70d on 3way. The schrader is 011 and piston was 011 or 012 I forgot. It’s been a while but 010,011,012 should get the job done

[Psycho91]

Looks like I might just have to get a tech matt with the oring sizes on it and order some for a rebuild the only thing I'm worried about sourcing is the reg seat

[Cdn_Cuda]

I use my oring sizer often. Very handy! I like the magnetic ones as well. Keeps thing from wandering.

[Jordan]

The reg seat looks an awful lot like a Rock/Stab setup. Wouldn't surprise me if that would work.

[Psycho91]

Thanks Jordan I'll go do some googling and take a look myself

[Blackmagic71]

On a side note: I always thought the front of these three ways was a decorative design choice, but it looks like it was made to give a place to grip it and twist it on/off the actuator rod.

Seems like a clever idea.

[Psycho91]

Yeah I thought the same thing my self even if the thing is massive

[Psycho91]

This is what the reg seat looks like, it really just looks like a thick urethane 12 gram seal but I know its not lol

[Jordan]

Imagine that in black, and you've got a Rock/Stab reg seat.

https://palmerspursuit.com/products/...e6a85426&_ss=r

[Psycho91]

Thanks I'll try that, the one I have may be good but I just want to replace it for safe measure just got to figure out the oring sizes now

[latches109]

You can use 006 in a pinch

[Psycho91]

Well I hate to say it but ol cocker top goofball knew all the sizes and even said that ans reg seats will work in this so that means mag reg seats will work as well right