Emag only shoots in e mode?

[tunaman5]

If you cant get it going just send it here and I'll fix it.

[FredMnkyDad10]

This is a very common problem that goes unnoticed alot. I have done it myself more than once.

Sometimes is the little things that you forget or dont check that is the issue. Like forgetting to put in the sear and airing it up.

[tunaman5]

Sometimes is the little things that you forget or dont check that is the issue. Like forgetting to put in the sear and airing it up.

I have spent hours years ago diagnosing an Emag...couldn't figure it out for the life of me. Then a flashback from the AGD Tech course appeared and a voice said "don't forget to take the safety off". The sea parted and the sun came out.

[nak81783]

Between that, and my hand always bumping the safety on during gameplay, I just took the cross-bolt safety off my X-Mag (which, by the way, you escrowed the deal on and serviced for me years ago, looks like 2013, according to some old records). Flipping the selector all the way back, turning the battery off, and degassing the marker made it plenty safe...

[tunaman5]

If it shoots in Emode you have a problem with the trigger rod not doing what it is supposed to do. Sometimes I have seen the triggers so far out of adjustment that Manual mode would not work. Set up the trigger in the software so you have a little play...then the shot goes off...then you have a little play again before it hits the stop on the selector switch set screw adjustment.. Do that then set the trigger rod to 2.125 and you should be good. Let me know how it goes.