Inline regulator list

[gnarlynick]

Is there a compiled list of known inline regulators and their range of output pressures?

For instance, if I want to regulate tank pressure down to 300-500 psi, I could consult this list for a selection of inline regulators that are designed to achieve that?

[Blackmagic71]

I’m not sure of a list anywhere, but the CP regulator and inception regulator are both in that range, work well, and can still be purchased new.

[JohnB]

^ I agree with above. Would add Dye dff reg to that list too I think. CP closed for PB, so can buy new for now*

[Ecapnation]

There's quite literally hundreds of regs out there.....hell some people don't even remember anymore that were crazy hyped

Pi regs? No? Nobody?

How about a rocdaboobs?

Then theres private labels.... .

Cp made shocktech, toxic and kapp regs

[GattoDiavolo]

Rocdaboobs? That was the actual name?

[Ecapnation]

Not making it up!

[superman]

ans, bob long, air america unireg, air america messiah reg................
sidewinder, 2 liter, sidewinder SST.......
hyper 1, hyper 2, hyper 3, Dye DFF-20 reg......
Inception reg gen 1, inception reg gen 2.....

[gnarlynick]

Those are examples of regs that do the 300-500 psi output?

[mercpb]

Easier to list regs that DONT fall into that range...
Spool-originating regs (dye hyper, smart parts etc) are happier in the 120-360 range generally

[gnarlynick]

I guess a comprehensive list is an unrealistic ask, considering all the one-offs and homemade things that I'm sure were being used over the decades. I don't know exactly what's out there as far as contemporary off-the-shelf regs are concerned

[Fubarius]

Lets simplify the list. Rare stock regs are irrelevant, nobody has a build today and is thinking "you know what this needs? A stock Dangerous Power G3 reg". Discontinued regs, unless discontinued relatively recently are irrelevant. So lets stick to "can be found for sale on-line, either still in production, has ample new old stock if discontinued, or commonly shows up used on ebay and the like".

So in vaguely alphabetical order (and as best as I can recollect)...

AKA; https://akapaintball.com/
Sidewinder, 0-800 psi
2 Liter+, Low Pressure, 0-350 psi
2 Liter+, High Pressure, 250-550 psi
SST, 0-400 psi, not in stock, may be discontinued.

ANS Gen X2 (yeah, really, some still floating around on ansgear.com), 0-650 psi https://ansgear.com/ans-gen-x2-inline-regulator-red/

CCM. When they're in stock of course. https://store.chipleymachine.com/s5-...i-gloss-black/ is in stock at the moment.
Assorted models, all 100-450 psi.

Custom Products. Yeah, discontinued, but they made a LOT of them. Still in stock on assorted sites. https://ansgear.com/custom-products-...gulator-black/
Assorted models, all 0-500 psi.

Dye. Assorted sites, including ansgear.com
DFF-20 Hyper Inline Regulator. 50 to 375psi
Hyper-3 Inline Regulator. 0-400 psi
2.0 Hyper-3 Inline Regulator. 0-400 psi.
Careful not to end up with one with the smaller top threads.

Eclipse.
SL3 Inline Regulator. 50-400 psi. Getting rare, but I found a few on-line. https://www.ebay.com/itm/387185306620

Inception Designs.
HPR https://inceptiondesigns.com/HPR_p/CGP-0064.htm 75psi up to tank pressure.

Palmers. https://palmerspursuit.com/collections/stabilizers
Stabilizers, 0-700+ (they have some listed as 0-700, some 200-900, but input has to be higher than output of course)
Low Pressure Stabilizers, 0-250 psi.
Fatty 0-400 psi.


So that's a start. Probably forgetting something obvious, so let me know and I'll edit them in.

[gnarlynick]

Thanks, man. Exactly what I was looking for.

[Ecapnation]

Too my rocdaboobs reg comment...

Yes it was a thing

[gnarlynick]

Does it do what it says on the tin?

[Ecapnation]

Can't say, never used it. This was given to dealers to test ultimately I don't think crossfire chose to manufacturer these.

[coyote]

They manufactured them.

The actual retail model was "rock da bomb".