Mag Pump

[nobbie333]

I am looking for a pump kit for a mag I am curious if a CCI under cocking kit would be a good place to start
it is fully self contained and it should be simple to add an arm for the bolt

[Hobbes]

I'm working on modding a cocking pump kit onto mine. One thing to consider is the kit twisting. It might using that CCI unless the wings align perfectly with the rail or you install a second screw.

[nobbie333]

We will se how long it takes to mockup everything up I just order the pump kit

[Hobbes]

Looking forward to it. Im trying to work the kinks out of mine.

[Hobbes]

Mine is functioning. Not pretty but it is working.

[nobbie333]

It fits pretty good
I pressed in a nut and add a 8/32 x 5/8 button head screw

[nobbie333]

[Hobbes]

Is the barrel cover what's keeping the pump handle from coming off the front?

[nobbie333]

Is the barrel cover what's keeping the pump handle from coming off the front?

Right now yes but I plan to add a screw

[Hobbes]

How well does the pump handle line up with the slot in the rail?

[nobbie333]

How well does the pump handle line up with the slot in the rail?

Great and not so good
My rail is not cut for pump I need to take it to a buddy house so he so he can mill a channel after that it should be great🤞
or are you talking about the under side there is a little bit of play but can be fixed with Pledge and epoxy

[Rino5050]

Is there anyone out there that has used a 2k pump kit?

[nobbie333]

There one wave spring on the way

https://www.mcmaster.com/1561T46/

https://store.smalley.com/c100-m1-s17.html

McMaster is way easier to order from

[nobbie333]

I got the wave spring today and had to test it out