One step forward, two steps back with my mag it seems. Good news is I’ve got it firing now. Cycles well and I’m right at the point where if I decrease the velocity it no longer fires, but then increase and it shoots fine. So slight improvement.
Downside is now I have a strong leak by the trigger frame, so I would assume it’s the on/off. This I’m not sure how to deal with. I’ve replaced all o-rings with an AGD kit and lube it up, but in my short testing I’ve lost over 1.5k of from my tank and only have 1.5 left.
So I would appreciate any assistance or direction on what to attempt next. I’ve removed the on/off and everything looks good. Is there a magical number of shims necessary?! Perhaps a splash of unicorn blood or sacred
MCB mayo?

Downside is now I have a strong leak by the trigger frame, so I would assume it’s the on/off. This I’m not sure how to deal with. I’ve replaced all o-rings with an AGD kit and lube it up, but in my short testing I’ve lost over 1.5k of from my tank and only have 1.5 left.
So I would appreciate any assistance or direction on what to attempt next. I’ve removed the on/off and everything looks good. Is there a magical number of shims necessary?! Perhaps a splash of unicorn blood or sacred
MCB mayo?
Comment