instagram takipci satin al - instagram takipci satin al mobil odeme - takipci satin al

bahis siteleri - deneme bonusu - casino siteleri

bahis siteleri - kacak bahis - canli bahis

goldenbahis - makrobet - cepbahis

cratosslot - cratosslot giris - cratosslot

Announcement

Collapse
No announcement yet.

ULT and Carrier questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    ULT and Carrier questions

    I reached out to Sandman with these questions, but he's probably sitting on a beach somewhere. With AO gone, hopefully someone here has the answers.
    I picked up a xvalve with a ULT, not sure on the age so I'm just going to rebuild the ULT.
    -What orings do I need for a full rebuild?
    -It didn't come with extra shims, what is that max # that I would need?
    -I know a SHP reg is not advised, what is a happy reg pressure for ULTs?

    I also saw there are 00 and 000 carriers now, are those new? How are they marked? I'm pretty sure I don't have any as my carriers are pretty old, but even the smallest is on the verge of too big.
    Feedback

    #2
    I believe max is 7 of the ult shims though most don't get that many. you can use level 10 shims, but they are twice as thick so you only use half as many.
    pressure really is dependent on how you want it to shoot, but really closer to the 800-850.
    Yes those 2 carriers are newer and are the result orings being made smaller by oring manufacturers. Click image for larger version

Name:	32169878_2152574868312269_3062098497051295744_o.jpg
Views:	48
Size:	269.6 KB
ID:	565657
    BeardedWorks.com (Your Inception Designs and Shocktech Dealer)
    BW Youtube
    BW Ebay

    BW Email
    I buy Automags and Mag Parts also.

    Comment


    • jpdgas
      jpdgas commented
      Editing a comment
      That's what I needed, thanks!

    #3
    To rebuild the ULT you will need a couple of on/off/powertube orings and a tiny black oring for the middle. I have them if you need them.

    Comment


    • jpdgas
      jpdgas commented
      Editing a comment
      Thanks Tuna, I have these in my AGD cart. I'm grabbing a full valve rebuild kit and some extra small carriers. Once the orings break in the 0 is slightly too big.

    #4
    It's taken a while but I absolutely love my xvalve and either ult or RT depending on the day.

    One recommendation, get a genuine rebuild kit from AGD for the x valve. They will last a decade. But realize, they need some breaking in so understand it's going to take some shooting and tinkering and then it will feel like it's gone out of tune and you'll need to adjust it again. After, idk, 5 cases or so through it even if it's just air it will all settle in. Just keep it drowning in lube while it breaks in

    Sent from my motorola edge 5G UW (2021) using Tapatalk

    I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.

    Feedback
    https://www.mcarterbrown.com/forum/b...323-s-feedback

    Comment


    • superman

      superman

      commented
      Editing a comment
      Too much oil will cause it to hydro lock and won’t work again until yiu actually remove some of the oil.

      You only need a couple drops here and there before play.

    • jpdgas
      jpdgas commented
      Editing a comment
      This is actually x-valve #3 (I may have a "problem"), but thanks for the heads up.
      I usually drop 2-3 in it before each play day. The oring break in phase does seem different with the new formula.
      How can you tell if it gets hydro locked?
Working...
X