2003 X Valve RT Pro

[Drone31]

I pulled my automag out of storage (15ish years) last summer and replaced all the orings. I have not been able to get it running right. How do you break in the orings. It has an RT on/off and level 10 bolt.

Thanks,
Brandon

[Magageddon]

leaking? Or just just not shooting right?

[Drone31]

Not shooting right.

[superman]

You have to shoot it. Get out and use it.

[Magageddon]

Your not really giving any information for us to try and help diagnose your issue. A picture or a video of whats going on would give us a better idea.

This style gun obviously needs higher output tank pressure to run right, you need 700 minimum tank pressure, I run mine on 850 which is the usual stock output pressure on a 68/4500 air tank. Do not use a CO2 tank, you will freeze the valve and it will not work right.

If your pulling the trigger and nothings happening, either your velocity screw isn't screwed in far enough or your sear pin length needs to be adjusted, you need a credit card thickness gap between the sear pin and trigger to work well.

Sometimes while the gun is aired up and not shooting right, just loosen the valve field strip screw a hair turn, sometimes the valve to body ratio is off by a few thousandths and loosening the screw will even things out. I've done this on numerous mags and has always been a good trick to know about if that's all that's wrong with your mag.