Automag, what do I have

[Aside]

My brother gave me a bunch of random paintball parts and in with it was this. What exactly do I have and what would it take to get up and running? There is some obvious rust on the bolt

[Heavy_D]

a few hour soak in Vinegar, and some 0000 steel wool, a good rinse, ( dunk in 99% ISO to removal all water, and air dry) then a polish, and some oiling will clean that bolt up for you, Also your brother is Awesome, That is a SWEEET Mag

[gabe]

As far as what it is, looks like a custom automag with X valve and a deadlywind body and rail. Definitely a big come up, those are worth some $$$ now.

[El Gringo]

XMT Ripper body and rail

[autococker04]

You have a very nice brother. I’m not up to date on values but don’t let anyone try to buy it from you for cheap.

[alpha_q_up]

XMT Ripper body and rail, deadly winds carbon fiber foregrip, "xvalve" lasered xvalve with level 10 bolt, Intelliframe trigger frame, looks like a cp feedneck and a smart parts on off Asa and smartparts drop. The rail looks to be raw, I'd recommend you getting it anodized, your brother had good taste. Prolly around 1000-1500$ in parts. To get it running you can clean the bolt up and drop some oil in the Asa and see if it seals and or fires, more than likely an oring kit will get it up and running

[Aside]

I'll probably keep the frame since both Luke and AGD sell a trigger I'm looking for. That 90° Angle frame is nice though

[alpha_q_up]

Lukes vert frames are nice, Conrad Customs also offers a nice double trigger that I want, and probably will use on my ripper build https://www.conradcustoms.net/shop

[superman]

I have some older luke triggers available.

[El Gringo]

Probably around but not 100% on body and rail
250 x-valve
80 Deadlywinds foregrip
125 Inteliframe
4-500 XMT Ripper body and rail

[Psycho91]

Wow he just gave you that, hell that's probably a $800/$1000 mag right there

[FredMnkyDad10]

Yeah that is an awesome mag and even better brother. What ppl have said is about right.

For sure get that rail anod, any place can do a simple gloss black or gloss red if you want to do a black red combo.

[Swedgin!!]

You scored!! As is, it’s still sweet 🤘🏽

[river031403]

You have a mag that these mag guys want lol they will become very very friendly with yuh and hit your dm’s to check on you and see if you are ready to sell lol especially the dudes from central coast in California teehee

[Chuck E Ducky]

Hand full of awesome! Clean that dirty bird up and let her eat again.

[1snowridr]

This is worth having it professionally broken down & anodized if the OP can't do it.

[Chuck E Ducky]

For sure!

[Aside]

I have it broken down. It's in rough shape. Not sure what has happened to it but the firing chamber has something all in it. Where the bolt spring sits looks corroded. There is a washer and some sort of retaining ring where the spring sits too. I think I can replace that.

The orings in the valve look okay. The valve at the bottom feels a bit "gritty" but I'm think it just needs cleaned.

The shaft the bolt rides on has some pretty deep scratches. I don't think that will effect how it works.

I'm going to get a soft bottle brush and see what I can scrub out of the body. It might just be old paint.

[1snowridr]

Yes, inside the body (because it's aluminum) you'll see a retaining clip that holds a stainless steel cup. It keeps the spring from destroying the aluminum body. Those are replaceable but it might be fine.

[Trbo323]

An awesome brother that's what you have

Sent from my motorola edge 2024 using Tapatalk