Agd reg seat?

[Trbo323]

Just want to make sure I'm looking at and ordering the correct part. This is an RT valve for reference

First, is this the reg seat?



And second, are these correct?
https://ebay.us/m/3tmHSw

Sent from my motorola edge 2024 using Tapatalk

[superman]

Rt valves use an oring for the reg seat.
That is the reg pin spacer. It goes between those 2 orings on the reg pin to the left. It is supposed to have a cut in it.

[Trbo323]

Rt valves use an oring for the reg seat.
That is the reg pin spacer. It goes between those 2 orings on the reg pin to the left. It is supposed to have a cut in it.

Ok thank you. Someone swapped some parts around on this valve and it's stiff like that that AGD was always like "don't take it apart" so they don't show as individual parts on the diagrams

Sent from my motorola edge 2024 using Tapatalk

[LukeAO]

This may help on reassembly

[Trbo323]

Hmm, maybe I have an extra o ring in there then. I have that one you pointed out Luke in the brass there but then another in the regulator body.

It's shooting, but it's shooting 375 with reball in a twist lock barrel and adjusting does nothing.

Which way is that brass piece supposed to face?

Sent from my motorola edge 2024 using Tapatalk

[LukeAO]

Here are the orings in the whole regulator pin assembly.

[Trbo323]

Awesome thanks for the diagram luke

Sent from my motorola edge 2024 using Tapatalk