AT-85 Front end Loader

[Snowpuff]

Today I spent a whole entire 3 HOURS!! Designing and making a prototype Front end loader.

It will have the ability to feed paint into the mag with force thus no more blank firing.
It will be using the M1 vmech hopper internals to push the balls from the front to the fingers of the mag, basically the same thing as the hopper mag but the hopper will be built into the front end loader.
ALSO it will have a feed lid on the side to be loaded with pods, hopping it will hold 100-120 balls instead of the 60 in the stock loaders.

[XEMON]

Great idea 👍
Keep us in the loop if love to add one of these to the family

[Snowpuff]

Update
i did a test for print . First print and she almost fits/ I forgot to put the bevel for the barrel down the center middle of the lpader so it dosnt fit perfect but all my measurements were pretty much spot on,

I made up the tubing but I might op out and use qloader hose instead

[L I T O]

Any progress? This can fix the disappearing magazines due to attrition.

[chplnstone]

attrition? I know bent pins due to tiny paint is a pain (not so bad at supergame east weekend before last, but last weekend has repeated issues), still prefer chainfeed vs. forcefeed

[XEMON]

I made 3D printed shim that solve most of the small paint issue, let me know if you want some, illl send you a few 👍

[Snowpuff]

This is for front end loaders and yes I made a anunch single loaders and double loaders
https://youtube.com/shorts/hdNd2XTs1...g8cPypfh_p0YkJ

https://youtube.com/shorts/sPP963V-y...2ZyNngBEBUkOzk

[L I T O]

Snowpuff Are you willing to share the stl file or have already?