E2 eyes not working

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Gsav22
    Bunker Buster
    • Apr 2023
    • 148
    #1

    E2 eyes not working

    I have a e2 and for some reason the eyes r not working but the eyes r good tried them on another board and they work so has this happened to anyone else
    Tags: None
    • Trbo323
      MCB Member
      • Jul 2020
      • 6381
      • Vancouver WA
      #2
      The connection on the board is probably the culprit. Have you tried a different set of eyes on the same board?

      Sent from my motorola edge 5G UW (2021) using Tapatalk

      I use Tapatalk which does NOT display comments. If you want me to see it, make it a post not a comment.

      Feedback
      https://www.mcarterbrown.com/forum/b...323-s-feedback

        Comment

        • Gsav22
          #2.1
          Gsav22 commented
          08-01-2023, 08:52 PM
          Editing a comment
          Yes tried a new set of eyes
        • jetenginekyle
          MCB Member
          • Jun 2023
          • 580
          #3
          Check that the pins on the board are clean and don't have any cracks on the solder points.

          If there are cracks on the solder points hit it with a soldering iron to reflow it when you do this don't linger too long or you will melt the plastic of the connector. (could try to remove the plastic to get it out of the way but old plastic likes to crack)

            Comment

            • Jordan
              I. Am. Canadian. 🇨🇦
              • Jul 2020
              • 3508
              • Southern Ontario, Canada
              #4
              Is your board set to the correct eye setting? E2 boards can be set to breakbeam or bounce beam, if I remember correctly.

                Comment

                Previous template Next
                Working...