Dye 2002 / Reflex 2003 Internals

[Sottyman]

Can anyone confirm what internals the 2002 (and 2003/Reflex) had? It's been so long, I can't remember if Dye actually made their own internals, or outsourced.

Thanks!
Mike

[latches109]

they made their own stainless lower tube. They are hard to tell apart from other stainless lowers.

[Ecapnation]

They had a stainless steel hammer that had two nylon set screws as well as a copy of the stock WGP valve but again made in stainless sometimes they had a stock wgp cup seal sometimes they came with a kapp high performance one.

It wasn't anything fancy.

That all being said if you're trying to do a restoration I probably have about 200 of the hammers missing the nylon set screws.

[Sottyman]

Thank you! I recently snagged a 2002 and am waiting on it to arrive. Kinda always wanted one, but wasn't ever in a position to buy. Not sure how I want to attack it. Might just replace seals and beat on it for a bit!

[Sottyman]

Can anyone confirm if it's 006 or #60 orings for the 3 way?

[jokers]

I think if i remember right the dye 3 way orings were a special oring that is why a lot of people changed them out.

[Sottyman]

I believe you're right, I've just seen a handful of old posts on various forums mentioning both 006 and #60. Might just get both and see what works better!