Dye Hinge Sear Springs?

[Sottyman]

Is there an official spec for these/anyone have a good starting point to work with? Just trying to avoid 30 trips to hardware stores if I can!

-Mike

[PumpMan10988]

I'd be surprised if they aren't standard WGP spec. The Inception sear spring kit is ten bucks, but the master kit (valve, main, sear, trigger) is only twenty.

https://inceptiondesigns.com/SEAR_SPRING_p/IFP-1032.htm

https://inceptiondesigns.com/MASTER_SPRING_SET_p/CGP-0136.htm

[Psycho91]

I like maggots SLPS kit

[Sottyman]

The ACP hinge frame spring I snagged was way too small/short, I'll take a look at the Inception stuff!

[Hellion360]

The ID sear springs are short. I would try the shocktech or maggot's

[Sottyman]

Thanks for the heads up!!