Stock class cocker question

[$L!mBo]

heres some pics of my sc modded rf with the cci/ev 2 piece phantom feed.

another point id mention is:
if youre running a bottomline setup, find some stainless braided line and swap your asa for a duckbill/screw in without on/off style. its a good thing that stainless braided line and the screw in, simple asa s are super cheap, usually "throw away" parts

some folks have no issues but with my testing, i got more shots per 12gram just changing those 2 things

[BLachance75]

I kind of want to build another sc cocker with a CCI feed after seeing yours. I have all the parts so maybe it will be a winter project.

[$L!mBo]

BLachance75 ive done 6 of them at this point, its super easy.
i like to crank the neck out with pipe wrench, tape the phantom feedgate on, lined up where you want it, 1/4 punch thru the mounting hole and then drill the pilot hole with it all still attached to keep the correct angle.
then i take the tape off to drill to size, tap, and clean up the burr inside the top tube.
10min tops using a cordless drill and hand tools

[MullerTime]

If you're chasing max efficiency, I've heard you can cut off some weedwhacker line and put it in your steel braided hose to devolumize it. I haven't tried it because I only have a 4.5 inch piece of steel braided hose and I figured a little room to expand would help when shooting quicker.

Anyone else heard or tried that tip before?

[$L!mBo]

i have heard about this and sticking.....something (😂) into the chamber in front of the valve for the same purposes.
imo, chasing maximum shots/cart is unnecessary. if you can get ~30shots, youre golden!

[Chuck E Ducky]

You should put this frame on your build and sell that double. 👌🏼

https://www.mcarterbrown.com/forum/b...ker-components

[$L!mBo]

whats the advantage of that frame? does it get rid of the asa screw?