MVP - Still possible to get it modded?

[Emert426]

Hey all.

Just picked up my CCM S6.5 and have the opportunity to buy an MVP which I’ve had my eye on for a while. Unfortunately it’s not PNV modded so I’m hesitating.

I’ve shot a modded one once and I did like it a lot as a second pump. However I’m not sure how/where to get an MVP modded nowadays. Is this even an option?

if I can get it modded I believe I will move forward with the sale as the marker is all stock currently. If not I don’t know if it will be worth buying frankly.

Thoughts and direction regarding modding would be very much appreciated.

[jetenginekyle]

I would bet superman who runs Bearded works can do it

[jetenginekyle]

Docs machine is another likely option too

[Emert426]

Ok I’ll look into these thank you. Essentially just looking to see what upgrades outside of the standard PVN mods would be needed. I’ll send some messages!

[DocsMachine]

I get this email, and lo and behold, here's this post.

I've tinkered with a couple MVPs, but generally just the usual minor tuning (mainly respringing) and the occasional minor repairs. I remember looking over the first one I had in the shop, to see if I could cut down the "farting", but the owner traded it off before I could do any experimenting.

I don't know what the "PVN mods" are, specifically, but if there's a writeup or description out there somewhere, I have little doubt I could do the actual work.

Doc.

[Emert426]

Hey Doc.

Just replied via email as the documentation I have is from another source that shall not be named here. I’m still digging for more info.

[El Gringo]

I believe you can get ahold of Paul VanNocker (PVN) on Facebook

[Emert426]

Working on that presently just in case.

[DocsMachine]

Clearly going with the originator of the mods will be your best bet. If he's not available for whatever reason, hit me up. It sounds like a fun mod- and I can say that, if the two I fiddled with felt and sounded like those other threads described, I'd have liked them quite a bit more. (Not that they seemed like "bad" markers, they just struck me more like they were rushed to market, without enough testing or fine-tuning.)

Doc.

[Emert426]

He actually just responded at this moment. Apparently he still works on 15 or so a year and has multiples on his bench currently.

I very much appreciate it and will be sending you a DM regarding another project sir.

[DocsMachine]

Good to hear. Sadly, there's all too many guys that come up with something good, but can't keep doing/producing it for whatever reason. (Airsmithing, I'm here to tell ya, is not exactly a profitable vocation. )

Doc.

[slomint]

Paul VanNocker (PVN) did my'n a few years ago. I reached out to him on facebook.