Working and Uncracked Eagle 68 on the bay

[MrKittyCatMeowFace]

Would be so fun to use, if you can get it to not fall apart.

[XEMON]

Note that the "mag/tube" is a plain 10rd tube
The original lock and is spring loaded.

[dartamon]

No, thanks. I recently fired and cracked one.

[acrewofone]

..somewhere in a parallel universe...

Matched pair of Brass Eagle “Eagle 68” pistols
Filled in all empty spaces inside with Epoxy Steel (lots of it), to reinforce the weak plastic bodies
Removed self tapping screws and used machine screws and countersunk nuts (filled in holes)
Sanded down body graphics (left "Eagle 68" intact)
Body painted light textured black
Painted grip panels textured tan (to look like separate wood grip panels)
All new o-rings, and lubed properly (Brass Eagle originally recommended transmission fluid!)
CO2 plug painted black
~285 across the chrono
(Also have 12 loader tubes)

[Chaos]

Would love to get my hands on one to do the same with it....they aren't bad, just really cheaply made and can be fixed with a little work

[Snowpuff]

That thing is a Beauty!

[acrewofone]

Snowpuff....("those things"), it's a pair.

[Ecapnation]

Anyone have a photo of these apart?

I have been curious about these but wondered if I could machine a new shell

[dartamon]

I'm thinking of casting a brass shell instead.

[acrewofone]

Anyone have a photo of these apart?

I have been curious about these but wondered if I could machine a new shell

I think I have some pics of when the above pair were rebuilt, on an old Hard Drive, I will look later tonght and post if I find them.

I might even have a left half body, if I can find it...