I ran into a hangfire issue today. Pull the trigger and the gun takes about a second to fire. It was not every shot but enough to be concerned. I assume I just need to lube everything up and maybe something is sticking. If anyone has run into this and has a suggestion please let me know.
-
-
Double check to be sure your front body screw is fully tightened. And check for broke shells in the body.
Good cleaning and light lube will fix almost anything. -
Nothing obvious seemed wrong but I just lubed it. No more issues. I assume the hammer was sticking. ThanksComment
-
Good to hear it cleared up. Like Jeep said a loose front frame screw could’ve been the culprit. The sear can push the hammer up instead of tripping itComment
Comment