Undercocking kit for the PRP

[Siress]

Did anyone get around to making one? I've always been interested in the platform, but I aim down the barrel so over-barrel pump handles aren't going to cut it.

[Chuck E Ducky]

I have never seen one. You would probably have to have one custom made since the PRP is long out of production and not many were made. Price to performance really hurt the sales.

Phantom had that market on lock, and the finish left a lot to be desired. It really would have benefited from a gloss finish especially the way the handle rides on the barrel. It would have really helped with feel.

I wouldn’t mind finding a complete one with the CO2 and HPA bits.

[Ego10Baller]

I had one made by a feller. Can’t remember who exactly but I think it’s the same guy who makes the jolo.

He did a fine job but the function was poor as the pump handle sags without the over-barrel attachment point

[Chuck E Ducky]

So it needs an over barrel style handle due to design. Otherwise it’s all flipy flopy.

[Ego10Baller]

Exactly

[Jonnydread]

Maybe a stabilizing rod that threads into the trigger guard?

[capitalpaintball]

I put a guide rod with return spring . threaded right into the frame. it does make it so you cant field strip with the pivot.

[Siress]

Very cool.

Ego10Baller , did the sag cause it to bind or anything?

[Ego10Baller]

It did cause it to bind, unfortunately

[Siress]

Ugh. Sorry to hear that. Do you think it could be shimmed, or maybe have a couple of these threaded up into the bar? https://www.mcmaster.com/93339A245/