New to me b2k

[Txaggie08]

Picked this one up off market place along with the spyder. Both are nostalgia projects honestly.

If im looking at this gun right, it's had an aftermarket ASA added correct( looks like a cp reg... ive got a gladiator coming ill put on it). I think the lpr is stock as well.

I had one years ago we ego framed, this one I'm going to build a shorter tray for and run a logic vert frame intended for an SFT shocker on ( FSP!!) and a nxt/break beam compatible board with the eyes.

Im seeing palmer advertising an ICD compatible lpr, will it work on these?

Always loved these little gun, and its one of the last stack tube gun that can realy be tinkered with.

[Myrkul]

LPR is stock.

Reg is indeed a CP HPR, but the vert ASA is also stock, they went to a standard Vert ASA in 2003 so it was easier to swap out the HPR (Thankfully).

As far as I'm aware, PPS only has freestyle LPRs in stock which won't work. AKA somehow still has Bushmaster SCM IIIs listed on their website.

[Txaggie08]

I see references to the adapters that used to exist to run cocker LPRs, but i dont think I've even seen pictures of one, do one of you happen to have a picture of the setups? I dont mine drilling and tapping things, can they still be rigged up?

Im glad it at least has the HP reg issue resolved! I'll ditch the cp? (Always hated them)

[Myrkul]

Some CP regs are better then others. Overall I've found them to be pretty solid performers.

[Myrkul]

Vaporworks did the original LPR adapters (two styles) and both are hens teeth.

Gen one could use any cocker LPR, these are the rarer of the two:



Gen two was specifically made for the PPS micro rock. It's hoseless, and Palmers eventually started making them in house.



Zenitram also knocked off the Gen 2 design for both their Venoms (which have a larger sized lower tube/valve chamber) and as a stand alone upgrade for regular B2Ks. You can tell which PPS adapters are Zenitram because the housing that protrudes from the body is significantly longer then it is on the Vapor Gen 2.

The LPR/LPR Adapter threads are 7/8" 20 TPI if you want to try and have a professional machinist duplicate a Gen 1 vapor adapter. It would be pretty difficult to try and duplicate one on your own.

[Txaggie08]

What are these?

[Myrkul]

Adjuster caps for the stock LPR assemblies.

[Txaggie08]

So I scrounged up part of an old parts gun I forgot existed. What LPR is this? About to go through it and see what all is in this one... wish I knew where the solenoid manifold and noid was, id build it out with an ego frame i have laying around.

[Myrkul]

Stock LPR with a freestyle adjustment tip. I've tossed a few of those together.