Spyder Eframe 9V Conversion?

[Trbo323]

That's not a factory capacitor. It's too large. They can be the same specs but it looks like someone already replaced it once.

lhamilton1807 I have a bunch of capacitors of you need some and find yourself up my way.

Sent from my motorola edge 5G UW (2021) using Tapatalk

[lhamilton1807]

That's not a factory capacitor. It's too large. They can be the same specs but it looks like someone already replaced it once.

lhamilton1807 I have a bunch of capacitors of you need some and find yourself up my way.

Sent from my motorola edge 5G UW (2021) using Tapatalk

Pretty sure it’s the stock capacitor - the caps on both boards are the same size. It’s probably the camera angle or how well organized the wires are that made one seem bigger/smaller.

I will check with my friend - one of us may find our way up your way in the near future.

[Trbo323]

Pretty sure it's the stock capacitor - the caps on both boards are the same size. It's probably the camera angle or how well organized the wires are that made one seem bigger/smaller.

I will check with my friend - one of us may find our way up your way in the near future.

@Super Nova may be coming up here today, I can send a few with him if you want

Sent from my motorola edge 5G UW (2021) using Tapatalk

[dutchcommando]

Sorry to necro-post, but I'm currently currently in the process of making a conversion of sorts that'll allow Spyders to be powered by a LiPo cell. It's not a 9V, but it will have USB-C recharging and a higher capacity!

[William the Third]

I'm tired and forgot the basics of working on electronics

The first rule is to never release the magic smoke.

[Frmrspec]

Did you accidentally run it in series?

[dutchcommando]

Lol, naa. I hadn't slept at all the night before, and I thought "well the 9.6v is outputting 10.5v, so I'll set the booster to that and send it!" That was a really dumb decision.......

[Tarsun2]

wait, where are you getting that voltage?
li-ion are usually 3.7v to 4.2v

awhile back, i put together an external battery pack for testing. it worked well but was big and bulky. Was about the size of a playing card and half an inch thick. it was good for testing and whatnot but got in the way during game play.

the reason they use nimh/nicad is because the nominal voltage is 1.2v/cell. this lends itself well to 9.6v as its just 8 cells in series.

the downfall to the nimh batteries is the 1.2v compared to the 3.7v of the ion's, but the nimh batteries are no joke. theyre often slept on because theyre "safe", have a lower V, and less energy dense(for their size) but, if you have the room they can really pack a punch.

[dutchcommando]

A voltage booster to take it from 3.7v to 9.6v.

Also, a major part of it is adding usb-c charging, just for the convenience factor.

[Tarsun2]

that would be pretty cool.
the buck/booster modules ive seen in the past have all be pretty chuncky. a mini booster would be neat for sure.
do you have to worry about the mA drop from the boost? i cant imagine the solenoid is a "high current" draw.

[appleguy]

Subscribing for future updates! I’ve always been so annoyed with the 9.6v requirements.