Emf100 drop stock tank adjustment lengths

[Trbo323]

Ok. Hoping a few of you can throw a measuring tape on your setup for me. Here's what's going on

Just picked up a emf100 and it has a collapsible stock on it, I don't like the collapsible stock and plan to replace it with the PE drop stock that also holds a small tank. My concern is I like playing pretty close to my markers so do some of the tanks out there prevent the stock from coming all the way forward?

If anyone has this setup that does prevent the stock from coming all the way forward, what tank do you have and if you can, can you measure either from the ASA to the back of the stock or back of marker to back of stock? Thanks

Sent from my motorola edge 2024 using Tapatalk

[Toestr]

The PE PWR sock will work with any 13ci or 15ci tank without issue. It might not be able to fully retract on a 17ci and definitely not on those super long 2" tanks from ninja.

FYI the EMF also comes with an adapter that for Tippmann 98 stocks which drops it the same amount as the PWR stock.

[Trbo323]

The PE PWR sock will work with any 13ci or 15ci tank without issue. It might not be able to fully retract on a 17ci and definitely not on those super long 2" tanks from ninja.

FYI the EMF also comes with an adapter that for Tippmann 98 stocks which drops it the same amount as the PWR stock.

Well mine sure as hell didn't come with any adaptor.

So next question, what is the fully retracted measurement of the pwr stock? I want to compare to what I have

Sent from my motorola edge 2024 using Tapatalk

[Walker]

Some additional PWR stock info:

In stock air with eclipse pwr stock - accepts tanks max 2" outside diameter
-13 ci fits all position 1 to 11
-15 ci fits all position 1 to 11
-17 ci fits position 3 to 11
-22ci fits position 11




With a 13ci tank.....................

[Walker]

If you want the tank to come off the back of the gun, and not at the bottom, MCS sells a frame and adapter kit to move the air intake upwards.....

https://mcsus.com/collections/buttst...ternal-air-kit

I use the MCS frame on mine, but have retained the bottomline setup..... I like the PWR stock...

[Trbo323]

Thank you Walker you are my hero

I saw that drop tank adaptor. At $150 and then needing a stock after that it's a hard sell. I don't really see the advantage.

Do you have all those tanks? If so, opinions? Shot count?

I have access to a 13/3k to get me started.

Sent from my motorola edge 2024 using Tapatalk

[Walker]

I don't actually have all those tanks, I found the information online and kept it for future reference. I use a 13/3000 tank, carry six mags, when I run out of paint I refill the tank. I've never drained it dry.....

My EMF100 runs all stock internals with an MCS Anti-chop Lok Bolt, and my Emek100 with the EMC rail also uses stock internals. My Emek 100 with the stock body has a Deadlywind Hair45 trigger valve, Exalt Ignition trigger, and a PBG Whisper Drive bolt/valve chamber.

[Trbo323]

The 4500 tanks are not exempt from hydro are they?