Taking apart a System X NME. I’ve actually had it apart and replaced the dead oring, but have a slight leak that requires some thread sealant.
Going to start off with the grip frame open. Removed the 2 screws in the grips, then the four trigger frame screws to remove the front plate. This also removes the trigger guard:
![Click image for larger version Name: IMG_8771.jpeg Views: 0 Size: 105.0 KB ID: 423038](filedata/fetch?id=423038&d=1687840209&type=medium)
Next step is to remove the eye cover and detent:
![Click image for larger version Name: IMG_8772.jpeg Views: 0 Size: 94.3 KB ID: 423040](filedata/fetch?id=423040&d=1687840273&type=medium)
And here you can see the Spyder style rubber nub. One detent per side, and there’s a slot so the detent can be moved forward for back a little as well.
![Click image for larger version Name: IMG_8773.jpeg Views: 0 Size: 71.5 KB ID: 423039](filedata/fetch?id=423039&d=1687840273&type=medium)
The removed the remaining to frame screws to detach the rest of the trigger frame:
![Click image for larger version
Name: IMG_8776.jpeg
Views: 330
Size: 99.6 KB
ID: 423041](filedata/fetch?id=423041&d=1687840440&type=medium)
Going to start off with the grip frame open. Removed the 2 screws in the grips, then the four trigger frame screws to remove the front plate. This also removes the trigger guard:
Next step is to remove the eye cover and detent:
And here you can see the Spyder style rubber nub. One detent per side, and there’s a slot so the detent can be moved forward for back a little as well.
The removed the remaining to frame screws to detach the rest of the trigger frame:
Comment