The head stripped out, wound up having to drill out the head, now the screw turns freely and wont come out what is going on??
-
-
The threads on the gun are a nutsert I am willing to bet the solder holding the threads in failed, and that nutsert is spinning on you. . Try holding the threads in place carefully while you turn the screw.
Or if the female nutsert is solidly bonded to the body, but the screw threads are still spinning. That tells me you gauled the threads on the screw you can try pulling while you turn carefully and see if you can't get the threads that are left to catch. You may also have luck simply torching the nutsert out, and soldering a new one in.
Jeeper Creeper has re soldered that insert for other members before so if it's above your skill set, shoot him a pm maybe. -
ok got it apart, here's what i got, i've heated the thing up as hot as my stove burner will get it and the remaining bit of the screw won't budge, where can i get a replacement and get it put in?
Comment
-
Ooof level 100. Man that sucks.
I am and or was really hoping one of the smarter guys would pipe in here, but in my morning coffee hour I've found that what I believe you are after is called a clinch nut. I found these on Amazon, but I advise you do your own diligent research before buying them on my recommendation.
uxcell Self -Clinching Nuts,#8-32 x 0.12-Inch Stainless Steel Rivet Nut Round Head Steel Metal Sheet Mounting Hardware Fastener 50pcs https://a.co/d/9Xtif7D
Comment
Comment