Building my first pump, looking for some advice

[Thedude_602]

If it’s helpful here’s an overview of pump kits. I really like the CCM EZ kits and the Slice kits and they are supposed to be releasing and upgraded Slice kit I believe.

https://www.mcarterbrown.com/forum/p...mp-kit-comparo

I appreciate the post as well as the time and effort you have put into some of your threads on here! Spent a good while last night reading through some of them to further my knowledge on autocockers!

[Pump&Run]

I like what Chuck E Ducky suggested for parts because a lot of those parts ( definitely the internals) have been proven by the geekiest of geeks on here for pump and stockclass play ( hpa & 12gram).

His suggestions put you in the best scenario for that body’s potential. You are going to get to that level of parts if you like pump eventually and if you don’t like it , it is immediately resellable.

….the other suggestions are good too lol.

[Thedude_602]

I really appreciate everyone's input and advice! I will keep you all updated on here to show the progress!

[Thedude_602]

I will have an update ready soon. I was wondering if someone could shed some knowledge on the best way to measure what size pump arm I will need? I thought I knew and ordered the wrong size.

[Psycho91]

There are 3 different lengths, full, mini, and mid block, unless you go mini half block and then I think you need a custom one made

You should need a full length pump arm for the body you have