Stock Class RF Sniper

[$L!mBo]

made this sniper a dedicated stock
class feed today!
pulled the neck, drilled + tapped my screw hole and threw it all together!
sorta "Sleeper"-ish
feels great in the hand and dialed in to 30shots @ ~275 per cart

[Axel]

Slick! Is that an inline reg on the 12g changer?

[$L!mBo]

yep, Palmers Cart Reg set at~350psi

[SignOfZeta]

I’ve been meaning to do this exact same thing with these exact same parts.

[NONOBLITUS]

Looks great , I have done this couple times and just a heads up as to not crank down too hard on that feed screw as it strips the aluminum pretty easily. Yes that’s how I ruined one.

[NONOBLITUS]

That’s a good idea , I will look into that

[Carp]

NONOBLITUS ASP still has 3 of the 8-32 in-stock. But, the 10-32 is out-stock. Not sure, which you'd need/want though.

Available in 8-32 and 10-32 internal threads. 8-32 inserts measure about .110″ high and 10-32 inserts measure about .200″ high. Sold in packs of 5.

[Chuck E Ducky]

You need the 8/32 that’s the size the Phantom uses.

[Chuck E Ducky]

Nice Save on that body it looks great! I got some devolumizeing printed pieces in mine. But I’m having issues getting the tune right I have been experimenting with.

My Goal is Trying to get the 2k + volume down to pre 2k volume to see if I can edge out some more shots. I think I need some heavy springs. The piece I added could be dragging on the springs as well causing in consistency’s as well. I’m running a palmers cart as well. They can be a pain to adjust I got a dummy cart I plan on hooking some bulk c02 up and testing different input pressures. I may have taken to much volume to so I might need to trim it back a lil. I’m fingers crossed hopefull for a drop in 12g efficiency kit for 2k+ marker.

I got the project center feed body with the feedneck milled off from Alex. I have gotten some good numbers out of it but it’s in constant. He made the devolumizer pieces I’m working with. I may try trimming the piece back a lil at a time see what numbers I can get.

Alexndl is the one who had the idea for devolumizeing the lower tube.

[$L!mBo]

i bought the cart reg off Colby after he "gave up" on building a stock class sniper. Poor dude was trying everything possible, driving himself crazy. we've all been there! His process was pretty logical : pre2k body, tiny hole valves and bolts. just couldnt quite get it where he wanted.
i threw ACP Gold(CCM clone) guts in mine, immediately got 23 shots at 300fps. switched to a lighter hammer spring and backed the ivg out a quarter turn and now shes getting 30 shots at 275. good enough for me, so im letting her sit like that.

[Chuck E Ducky]

Nice that’s good numbers for a sniper.

[Psycho91]

Seems like if you try to get anything more then 25/30 shots of a 12vie your just beating a dead horse, I have seen snipers get 45 decent shots but I think they were set up like your usual sniper/cocker

[Chuck E Ducky]

Hellion has one that gets really great numbers to. It’s tuned perfectly. I would like to get mine there. Then I will make it all pretty. I got a Milled out Dock stock to go on it when it’s ready for Ano.

[$L!mBo]

would love to get mine milled Estilo/Mozak old school style. cut throughs, a few pill cuts, maybe the Evo style "popsicle stick" on the top tube to blend the jewel spot in. would just leave em raw

[Chuck E Ducky]

Yeah I plan on sending it out for a fancy cut but I got to get it shooting right.

[BLachance75]

I had Mozak make me a custom rf empire spec stub. The feed cap that comes on the ICD feed is hot garbage so I put a little piece of tape and a CCI feed cap.

I went with a CCM lower tube kit and have the reg set at 350. I'm getting over 30 shots at 280 fps. It will shoot every shot at full velocity then vent a tiny hiss. I'm not getting any drop off.

[$L!mBo]

dang, cant believe i missed out on the Marker of The Month thread for snipers!
anyway, have some MoDStock mode madness!