Scored a PGP

[VintageZoomer]

Well, I aired it up and it leaked out in seconds. Evidently the seals must be fried. Here's the photos. I guess I have the round valve cause it pushed out easily. Looks like the 12g seal is pretty crusty. Guessing that's where it leaked.

[VintageZoomer]

So I just need a phantom cup seal and a couple of rings then? Seems pretty simple

[Chaos]

Exactly,just a couple o-rings and a Phantom Cupseal and you're good to go.... You can refurb the Sheridan Cupseal with a drill, toothpaste and an old toothbrush

[Funsi00]

https://www.mcarterbrown.com/forum/p...screws-and-all

A diagram of cartridge valve a various pieces

[JonM]

Pro tip: Mark the two halves of the valve before opening it up to ensure the two sides line up properly when you reassemble it.

[VintageZoomer]

Did not know the cartridge valve would come apart. Good to know.

[VintageZoomer]

I got ahold of a Palmer's seal kit with the dynavalve. Aired it up to check for leaks, but didn't have any paintballs. None in stock unless I drive an hour. I had to shoot a good number of times to run out of air, so I'd say the leaks are gone.