PMI II

[Heavy_D]

Shortened the Barrel, to 10" OAL, 5" of freak insert, and 5" tip, also added a ring and a bead sit to make it more than just a tube haha. Waiting on a brass thumb screw that will secure the barrel tip.

[Cal440]

Really like the look of the barrel front.

[Impactfour]

Man this is some really inspiring work. I'm asking my wife for a Mapp torch for Xmas this year. If her or Santa pull through I may be reaching out with some questions if you don't mind.

[Heavy_D]

Had some cocker frame adapters 3d printed, and stuck a WGP 1.5 frame on it. Have to find a 7/8'' powerfeed plug for the front of the cram N jam, and am thinking of adding a T stock, either with a bottle mount on it or 12 gram lever changer T stock, something along those lines...

[Heavy_D]

Made a Power feed Plug from a piece of Maple Dowel, painted black, Switched to macro line, kept having leaking issues with the hardline, did some test shooting today getting about 28 shots on a 12g C02. eventually may add a rubber spyder style detent if double feeding becomes a issue in game.

[Cal440]

Looks great, really like the setup now with the 12 gram changer. Could you show a closeup of your barrel retention, also nice design on the barrel tip.

[Heavy_D]

Its essentially friction fit, with a 8-32 brass tipped set screw. soldered on some more material to have more threads for the set screw. I tighten the set screw minimally.

[Cal440]

Thanks 😊