Jordan's Brass Thread

[Jordan]

This is going to be a repository of projects I'm working on... I've got a few ideas on the go and figured I'd share the progress.

[Jordan]

PG rebarreled with new centerfire length breech and
.680 Ti seamless tubing. I mocked it up with a KRain frame, still need to cut the quickstrip slot, clean up the solder joints and polish everything, and find my Speed Demon bolt back from wherever it ended up. Updates as they occur. 🙂

20261024_215052.jpg

[BrickHaus]

Jordan.. I hope you already realize this, but your talent is of the highest caliber. I have some TI tubing laying around, and I hope to make some similar shooters. Though my barrel material came in at .670, so I believe I need to hone it out to have a shot at using it.

I had the pleasure of meeting RAZRBAKK on my recent trip to BANFF, and you came up in conversation.( we were talking about how paintball is hurting up in the great white north, and how spread out you Canadian MCBrs are). We both had nothing but great things to say about you, but we both agreed that you in past havent given yourself enough credit for being talented at building beautiful guns, and seemingly whipping them up in a few hours on a weekend.

Now all fan boy comments aside. When you sleeve the ti tubing in brass, is there a shoulder in the brass sleeves to capture it? Or are you using some sort of epoxy to lock that ti tube in place?

[Jordan]

Well, I appreciate all the, er, appreciation. 😉 I just try to build stuff I think looks cool is all.

There is indeed some sleeving happening. The Ti tube has a short bit of 21mm tube pressed over the breech end and is joined to the breech with a piece of 23mm tube that covers both breech and barrel to join them together. If you're using the Walz method, a short piece of Sheridan feed tube can be pushed over the barrel and then sleeved together with the usual 0.811 ID tube that he recommends, I've been using Amazon sourced tubing to avoid the shipping costs that Onlinemetals.com charges.

[sonixr7]

I agree and appreciate as well. They look really cool.



And I missed out on a few.

[Cal440]

[Jordan]

Mostly done at this point, just needs a Kframe to complete (and maybe a Fastchanger). I'll polish it further once I pick up another drill press and get my polishing wheels set up.

I decided against a quick strip slot, the Speed Demon bolt has a spring loaded lug that's easy enough to push from the bottom if I need to pull it.

And.... I'll probably put together a clip on feed too, then I can run it SC as well.


20261101_160829.jpg

[Cal440]

Looks great as always Jordan. Could you tell what type of solder you prefer.

[Jordan]

I like to use this: https://www.homehardware.ca/en/227g-...KpyOuiTtB2vdgx

And flux. It's got a higher melt point than 50/50 plumbers solder and more tensile strength, but you'll want MAPP gas to avoid frustration.

[Rainmaker]

Looking quite slick, good sir!

[Jordan]

Some past projects:

Springfeed body for my PPS Hurricane:

nmLdh97.jpg

PMI build - sold to Grendel

nLIByaM.jpg


Bolt-action KP I built for Alexndl

V6YU9vy.jpg

Another build for Alexndl - double barrel, Freak'd.

8poIXnJ.jpg

Prototype brass Sniper I gave away for Walzmas a few years ago.

c8fgZhZ.jpg

[Jordan]

A few more:

Double barrel, .680 Ti barrels

N0xqZ0Q.jpg


Another brass Sniper, built using a Meteor pump kit. I ran a Lazarus valve in this one, 280fps @180psi I think?

uo1EqmU.jpg

Couple of single shots, the octagonal barreled one was another Walzmas giveaway.

v4yg7e0.jpg

My favorite build, my KP2. Started as an eBay rescue that morphed into this.

LGUIvoz.jpg

I wanted to build a carbine-style rifle so this happened:

umh3thV.jpg

[Jordan]

Some more:

Brass accents for my Trilogy build - full brass front end including a brass LPC, and a brass snatch grip.

a7CerE1.jpg

T0G9CE6.jpg



"Magfed" Sheridan - underbarrel springfeed tube, lever action.


jYqoXgi.jpg


Brass exoskeleton, magfed converted SP Ion. Lots of tricky stuff on this one, it was a fun build.

wL55gcE.jpg


And a bolt-action Sheridan build. CCI feedblock, late model Bluestreak triggerpack and stock.

dsWlTNj.jpg

[Jordan]

And lastly, a few more:

Brass Cocker build:

ibUlkEF.jpg

Stock class Sheridan scraps build:

DUNL9Q2.jpg

Brass Sniper:

lnGrIvg.jpg

PPS Squall clone:

boh5x9H.jpg

Couple of brass builds for @Alexndl:

217yFzN.jpg

[Cal440]

Thanks Jordan for putting them all in one place, so we all can find them easyer. Fantastic work as well. Any progress on your Blaphoon build?

[Jordan]

Thanks Jordan for putting them all in one place, so we all can find them easyer. Fantastic work as well. Any progress on your Blaphoon build?

Nothing to post yet. I need a drill press still before I start anything else - I have a mech conversion for my Matrix I'm working on too that needs one.