Bring a few vm's back to life

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Chuck E Ducky
    Ragnastock Enforcer
    • Jul 2020
    • 6114
    • NY

    #16
    What’s the benefit of the AGD spring?

    Comment

    • Kit352
      Bunker Buster
      • Feb 2025
      • 406
      • Central mass

      #17
      Eliminates the main spring and supposedly gives a massive fps boost, like 30fps. Just shooting it without a Chrono the kick is drastically reduced and it hits trees further away. I suspect it will be less prone to machine gun when air is low.

      Comment

      • Chuck E Ducky
        Ragnastock Enforcer
        • Jul 2020
        • 6114
        • NY

        #18
        Interesting you use the silver springs?

        Mine doesn’t really have velocity issues but I wonder if it will make it more efficient.

        Comment

        • Kit352
          Bunker Buster
          • Feb 2025
          • 406
          • Central mass

          #19
          I have the silver and black springs from the automag. They shoot slightly different but I can't tell what's best until I get to a chrono. Fining tuning velocity will probably be just a spring swap.

          Comment

          • Kit352
            Bunker Buster
            • Feb 2025
            • 406
            • Central mass

            #20
            https://paintmagazine.com/on-the-wor...ng-conversion/

            Where I got the info from.

            Comment

            • Kit352
              Bunker Buster
              • Feb 2025
              • 406
              • Central mass

              #21
              Got my first kills with one of the vms this past weekend. I put an Armson shorty barrel on it recently so I wanted to give that a go. The assassin set up one shots amazing but suffers from slightly low fps. I can only get about 250fps out of it. I can't really put any sort of spring spacer in it to help because it will run into recovering issues or more specifically trigger release issues. I drilled out the valve as big as possible and it helped a little but not enough. The bolt has already been drilled and screwed in as much as possible too. I think the only thing left is to give it more psi which means either a new reg or figure out how to increase pressure on one of my existing ones.

              Comment

              Working...