Double Mag Rail

[automeister]

Anyone out there made one of these? If so, did you modify the bodies as well?

[Ecapnation]

The bodies don't need modding the trigger group does

[automeister]

Ah, that makes sense. I would like to see a picture of how folks have accomplished this

[Chuck E Ducky]

cougar20th

[FredMnkyDad10]

I so need a rail and trigger group for warp ule bodies. Anyone try doing a printed rail?

[automeister]

Are the rails different for these bodies? I don't recall hearing of that

[SR_matt]

I believe at least some rails need to be modified for some warped bodies. pretty common to find rails that have had to be notched on the BST.

[FredMnkyDad10]

automeister are you talking about regular rails for single ule warp bodies? If so they are not different rails. You just have to have the side of the rail notched so the body sits flush.

If you are talking about rail for a double mag. Yeah those rails are custom and not many made.

[automeister]

I was just referring to the single rails for single ULE bodies. As for the dual barrel body those are different. I am wanting to find a dual mag rail or find someone that can make one.

[Riot]

cougar20th

cougar20th

[FredMnkyDad10]

automeister black rails milled for ule warp left.

[automeister]

Thanks!

[Chemical-x.....ahain]

do you still have a warp left emag compliant rail?

[superman]

I have warp bodies and rails.
https://www.mcarterbrown.com/forum/b...ously-updating

[automeister]

Would a 3d printed rail hold up?

[SR_matt]

Ive seen some people that have made them but I don't think we have seen actual long term testing on them. while the frame should (should being the operative word there) take up the linear stress it just seems like you're pushing the materials past the intended usage. Granted I am a bit of a luddite when it comes to 3d printing and feel it only has very specific uses (and maybe ive just seen too much low quality consumer level printing).

I would be much more comfortable using a resin or SLS type printing for a rail than an extrusion... but guys are making AR lowers out of extrusion printings and getting a lot of shots out of them so it probably would work, but should still be seen as a long term consumable.

[Ratzo]

I have always wanted to get a double classic RT made.

[automeister]

Did KAM make a dual rail at some point? Still want one but not sure who to contact