JT Triad - My woes with used loaders.

[smul]

Fresh drivebelt installed, the old one was at least 2mm stretched. Hopefully it helps.



IMG_6153.jpg
IMG_6154.jpg

[smul]

And it seems to be fixed! PE 180r set to 18bps PSP ramping


https://youtu.be/odLS2cLh88Q?si=4q1HqdwVTpva4Tgx

[smul]

And here's a clip of the before, where I had to fight it to get balls to feed into the stack if I filled it while turned off:

https://www.youtube.com/shorts/jU7gR99EHjU

[smul]

If anyone ever sees me at the field and wants a new drive belt oring or two for their triad, I bought 46 with my theoringstore order 😂 I'll happily give anyone a couple

[The Hobbit]

So has anyone played around with pulley diameters on these yet? See if you can get more bps or less prone to jamming by changing a pulley diameter?

[smul]

Aaaand predictably maybe, it still wasn't consistent last weekend. I want to like it but I'll probably end up with a DRV or CTRL2 with a bigger shell.