MOTM August 2026 Autocockers - no pump, no electronics

[NONOBLITUS]

black Cherry 🍒 Inception Ripper built for me by Hellion360 few years back and it gets tons of action on the field. I couldn’t be more happy with a shooter.

[Hellion360]

That was such a good little run of ano.
Looking good!

[Hellion360]

WORKS - Gen 1 - Merlin - Full Length Body
It's a good gun.
Shoots great, quiet and smooth. Classic style but lightweight. Great slide frames/internals from Works.
Updated with reg internals from Docfire, AKA Valve, and a PWR barrel.

The first generation of Works cockers were milled by CCM from AKA Merlin Blanks, later generations from CCM blanks.

[evilfishsticks]

2k1 WGP cocker that's been nicknamed "green bastard". Shocktech pneumatics and bolt, ACP rat clone internals, CP reg, freak. I had gotten the front end kit for a great deal just before i stopped playing around 2010. When I got back in in 2020 i finally installed them on the cocker they were intended for, and since the color was way weird I decided to just use every different green I could find for all the other bits.

[Blackmagic71]

One of my personal favorites!

[Buff_phroggie]

Trilogy Tatical, big pp modded lazerus valve, JC hammer, cockring bolt, cockring modded bolt, ST ram and lPR with attktx lp kit, custom trilogy length titanium pump arm, attktx titanium cocking rod and beavertail, GF frame wit ZFR trigger plate, PPS grips, and a few other little things here and there that I haven't mentioned

[Nickp84]

Bill Macke reverse autococker

[ChuckLove]

Here is is my lovely FreeFlow Millennium 2018 Re-Issue.
It's been tasteful modified with a handful of items and rebuilt by superman

[timetopat]

While not the craziest autococker, this is my orracle that I got recently in some really good condition. That and the vf tactical were my dream guns as a teen. It has some shocktech upgrades and a clamping feedneck I found in a parts bin at ion.

[SockeyeSteve]

Can't go wrong with and Orracle!

Those barrel tips are my absolute favorite

[trestles126]

new Mark Davis MK-5

[superman]

RJ Extended reach merlin.
There were only 3. 1 has since been minied.
Inception Pneumatics, feedneck, detent, EZ on/off.
AKA sidewinder, bolt, tornado valve
ccm hammer

[Swedgin!!]

Y’all got some Purdy thangs

[scottieb]

Submissions will end tonight. We'll begin nominating on the morrow.

[Super Nova]

Warped Sportz Dark cocker

[SockeyeSteve]

With the JT boomstick?? That's hawt

[latches109]

The Andy Warhol BMW M1 Meteor Serie G

I spent ages hunting for an original Serie G Meteor Autococker and finally reached out to Fab about one. Unfortunately, he’d only made 5 in the initial run—and every single one was already sold.

Fast forward a couple of years: I ended up helping Fab quite a bit as he got back up and running. He remembered how badly I’d wanted a Serie G, so he made a brand-new run just for me <3 —and even hand-delivered it all the way from Switzerland!


I'll take a better photo tomorrow.

[scottieb]

Start up your nominating engines and let's nominate!

[StaticShocked]

This is going to be very difficult...

[scottieb]

StaticShocked It only gets harder too. Then comes the voting.