MOTM September 2026 stock class setup

[scottieb]

This month we honor stock class paintball. Post your stock class setup and see if you can reach the top honor this month!


Rules:
-Any marker so long as it fits within the definition of Slim's stock class 2.0 can be submitted. Link to those rules -> https://www.stockclasshq.com/stockclass20
- One picture of the marker. Remember, this is a marker of the month contest.
- You can include a description for others to know more about your submission. Stock class play inherently involves specific gear, hence the word "setup" in the thread title. It is not required however it would be fun seeing everyone's setup.
- MOTM is always open to everyone on MCB.

[Super Nova]

Punisher Crowdbuster

Does this count as SC or do I need to take the spring out of the tube.

[Jonnydread]

I m a g i n a t i o n

[Cal440]

Wow very cool!

[Carp]

I'm not sure, if scottieb is using the 1.0, 2.0 SC rules or allowing spring assist feeds. IMO any marker with a spring feed is out. Also, any marker that can't hold at least 10 and no more than 15, are out too. Sorry, not sorry, single feeds. Y'all got the Oct and Dec "markers month's" to show'em off. Good thing, scottieb has the tough decisions to make and not me.

[acrewofone]

Nelspot 007 - Stock Class Setup

quick strip slot
slotted right side
double tapped bolt
dual armed pump handle made from broken Nelspot pump handle
CCI Paintball red main spring
Lapco #6 powertube
Lapco valve retaining screw
Black Magic valve cup seal
WGP trigger shoe
Nelspot wire stock
7.5” extended barrel
custom wood grip panels
back bottle adapter
12 gram bucket changer
welded in hopper adapter
horizontal feed adapter

(slap a Hopper and a Small Tank on there and you are ready for Open Class)

[JeepDVLZ45]

I always LOVED this marker. Brings the cool factor to the next level!

[Magageddon]

My Z grip Sydarm pump mag pistol. Takes a 12 gram in the top tube/fits 8 balls in the feed tube with the spring feed removed and gets about 10 shots efficiency. I built it because I could lol

[RPP]

Im excited to see these setups.

[ThatBobbyjoe]

Diablo I built up for my dad. Re-threaded the body for cocker barrels, vasa made from an old 98 Asa, CCI bucket changer, homemade t stock, Spyder aluminum 45, and a homemade brass trigger shoe.

[Carp]

Do you consider the left or right side, the better picture?

Rules:
-Any marker so long as it fits within the definition of stock class can be submitted.
- One picture of the marker.
- You can include a description for others to know more about your submission.
- MOTM is always open to everyone on MCB.
....

[ThatBobbyjoe]

Fixed 🫡

[Chuck E Ducky]

Creeper Customs Single Shot

This Started life as a component valve PGP. Breach was moved forward to except a customized KP length center fire Speed demon bolt. Breach was off set slightly left so I can feed it paint from my Non dominant hand. It was also cut to fit first strikes and the barrel was made longer to hold Freak inserts and match the extended length quick changer knob. The top tube also hides the holes used by the speed demon bolt ball detents that lock the bolt closed so you don’t have to hold the breach closed when firing. We added a Sergison Machine brass K frame with custom woodland themed Pachmayr grips I had made.

This marker is hands down the most rewarding marker to shoot. It’s so much fun. It points so naturally, its weight makes it super steady and accurate. It has won me many quick draw trophies over the years. Given me many memorable games and ridiculous shots and it was made for me by a great friend and Teammate.

[BigRed]

Based on the post I’m following I shouldn’t bother, but here we go…K-framed PGP2K.

[cougar20th]

Just my R7.

[Chuck E Ducky]

That Gold Ano is amazing.

[ThatBobbyjoe]

Man I love the R7

[NONOBLITUS]

[NONOBLITUS]

Hmmm I’ll try another post

[Carp]

Which one you trying to post the Purple/Black acidwash Phantom or your favorite brass knob shooter...something else?
[IMG]zapped to clear thumbnail distractions[/IMG]
[IMG]zapped to clear thumbnail distractions[/IMG]
[IMG]zapped to clear thumbnail distractions[/IMG]
..

[NONOBLITUS]

Something else. I have given up on the new format.

[chplnstone]

full setup (I rarely carry one marker).
back gun- p68sc 'bloodletter', cooper-t backspin bolt, k-converted
left hip- p68sc 'red right hand', cooper-tbackspinbolt, xl freak'ed
right rear- stock pg w/frame swap
sporran drop pouch, tube holder, gauntlet or 2

[Carp]

...but which one is entered in the contest? There has yet to be co-marker of the month winner allowed, that I remember. Nice rig though!

[chplnstone]

while i know it's 'marker of the month', this time they specified setup, thus the spread. each has a purpose, so i typically carry more than one (stock barrel overbore for backspin/range/inefficient, xl freak for efficiency, pg for 'everything else is empty'). if i had to pick only one it would be my back gun (top), and the reason is a story. close to 2 decades back a buddy of mine ander (redna) and i were invited in on an outlaw/pallet field game, and he wanted to try stock class. i had a few old rental p68sc's i'd bought from another member (jazzman?) and handed him one while i used another. as the day played out, it became more them them hiding behind pallets dropping pods while ander & i hunting each other playing our own game on the same field, the day ended with a mutual elimination over the top of a pallet bunker at close range with ander receiving a nice, juicy, bleeding neck hit (hence 'bloodletter', while his brother is 'red right hand' as ander is a rather large, hamhanded, somewhat hellboy guy).

[Swedgin!!]

Removed and saved for another month 🤘🏽

[Ecapnation]

Ecap - Perigrine

- Full lapco internal set (fluted hammer even!)
- All manual machined from billet with the exception of the main body which is a modified taso something or other and the rear air block which is original 007
- Recently modified for freak inserts by BMC
- Magnetic trigger
- 12 gram drop out frame

[scottieb]

Clarifications have been made to the rules for this month. Please see the first post and adjust your post accordingly.

I apologize for lack of clarity in this month's rules. I am recovering from a surgery (vasectomy) gone sideways and rushed getting this month's contest going, and I've not timely tended to it. Thank you to Carp for all the barking.

[Ragu310]

Punisher's KP-2

Combat Pump
Stock CO2 holder
Extended CO2 piercer
10-round side tube
Top Sight rail