MOTM September 2026 stock class setup

[Melrosejedi]

sniperlizardpump.jpg Built and annoed by me for the love of stock class. She is a nice shooter.

[JeepDVLZ45]

I can verify it’s a good shooter; I’ve received a welt or 6 from it.

[Hellion360]

Now we're cooking

[acrewofone]

is soooo purdy.........

[NONOBLITUS]

[binson]

I can see the flowers

[NONOBLITUS]

Did it work ? If not F it. Ha

[Fossilhead]

Worked for me

[Hellion360]

IMG_8080.jpg
Dropout Phantom with Duckslide
Kit's Cram N Jam

[Chuck E Ducky]

🔥 🔥 Spicy 🔥 🔥

[Chaos]

Carterized Check It Super Stock Released in 1994 and modified by Carter Machine.
Body was modded to accept Autococker barrels and a custom cut TechT iFit was done just for this marker. Has a custom Titanium barrel tip as well as a PPS Chrome plated Brass one,and a J&J Stainless one
Also have a custom cut DW Fibur Freak barrel for it with custom cut Freak inserts (cut to simulate the bevel Carter's need) As well as a FloryPB loudener
I added one of JimmyDee's Mag Changers to it (based on in old Avratech R7 design)
The frame on this actually came from another CIP I had (Long story that many of you know already)
Trigger is from an actual Carter Desert Duck.
Internals are Carter Buzzard.
Also added a See All Open Sight to it.
This is a very special Marker to me....It's has a cut 12g within it that contains some of the ashes of our fallen brother Splattttttt and it has been dubbed "57" in his honor. It is one Marker I will never part with

[JeepDVLZ45]

Technically a CCM T2, with a BMP top tube, CCM rock back cram and jam, oDm pump handle, and ICD Lever Stock. Cerakoted by Barefoot Customs, Doc’s “nail” bolt pin, CCI braided line, Shaft XL kit with flame anodized Silencio Titanium Barrel. Still looking for some titanium grip panels I can flame anodize for it.

IMG_7217.jpg

and a “before” pic (if it’s allowed) so I can remember it’s “humble” beginnings…

IMG_2523.jpg

[Carp]

In past like MOTM events. The secondary photos are/were reserved to the voting stage thread. IIRC, that's where the extra pics are used to pull more votes.

[Fossilhead]

Even the paintballs match 👏

[Pogi Si David]

Good ole phantom

[evilfishsticks]

I realize now I should've found a stock before anno, but I don't play stock class very often so I guess it's okay. Phantom w/ blue acrylics, ASP detents, .22 mod, freak and standard barrels.

20260516_162045.jpg

[RAZRBAKK]

I was hoping to get some better pics as I dont have any in its near final configuration, but the weather has been crappy for a week.

2026-09-07-08-30-51-569.jpg

Traccer
CF SC body
Phantom feed
Doc's ICD valve body and Freak XL Bull Barrel
ICD level changer
Kenimex pump handle
Lonestar grip for max vietnam realism

[Cal440]

Nice shooter.

[Jordan]

Still a work in progress... I mocked it up in an old pirate-ed Cane stock but I'm not sold on it yet.

Here's my Pile - O - Scraps (aka POS) build. 🙂 Cocker thread, SuperStocker style cram-n-jam feedtube, KP-spec lower tube, built from whatever Sheridan and Bluestreak pieces that survived the purge before I moved.

20260907_193957.jpg

[Carp]

I think, I own this... 🤔

It has not been seen in sometime and has unverified proof of life!

PJ aka Plain Jane by Walz

fetch.jpg

[JeepDVLZ45]

Thank, GOD there’s finally a Walz in the running.

[Cal440]

It may be a plain jane but it still is very cool.

[Kit]

20260907_120208.jpg Palmers Superstocker in a classic finish

[Cal440]

How is that classic finish achieved?

[Kit]

I believe you polish first and then mask before you blast for the mat finish.

[Booska]

My stock class sniper. Favorite marker I own and it's my go-to for rec ball.
IMG_9125.jpg

[Dirklax39]

Siiiiccckkkk

[F1FX]

IMG_2327.jpg PTSC #007
CCM bolt
CCM frame
CCM hammer
Indian Creek co2 quick changer
Lapco big shot .682
Palmers Sniper Valve
Palmers regulator (stabilizer/12g cart quick changer)
Tech T back block
WWA pump kit