WTB: Midblock Autococker body - empire low rise feedneck, milled for eyes

[Lotus]

I want an autococker body that is:

• midblock (not halfblocked)
• empire spec low rise feedneck
• drilled for eyes
• mini or not, either is fine. I prefer full length
• in decent (not necessarily perfect) condition, lightweight, and meant to be played with. No death spikes as a result of the midblock and no rectangular bricks.
• internals are not needed, but if they're good I may want to buy them anyway.

One of my long standing projects is my Eblade autococker. It's still not done, and I've let it fester for so long. This body is one of two pieces left to the puzzle, and the other is getting my Xonik frame mod'd to accept an Ego 6 button pad. That second one is not technically necessary to get it on the field, so let's start with this body. I might have to give up on this already existing and just have one mod'd to my specs and then get it reannod on top of that.

[Lotus]

bump

[Lotus]

bump

[Lotus]

bump

[Lotus]

bump

[Trbo323]

If you want I can put you in touch with a buddy of mine, he just got done creating a e blade empire resurrection. It's not for sale but sounds like exactly what you are looking for. The reason you should talk to him is he has a guy who milled, drilled and printed a cover for eyes on a resurrection.

So now he has a e2 resurrection. Calls it the "e-rection" because we are all still 13 apparently

Ghille-Man

Sent from my motorola edge 5G UW (2021) using Tapatalk

[Lotus]

That would be great. I have 2 empire resurrections and I'd enjoy converted one to fit my eblade kit.

[Ghille-Man]

id be happy to help! let me know if you have any questions.

[Lotus]

Given I have an empire resurrection and a full E2 frame (well, e1 frame with E2 solenoid and E2 board), what would the cost of this be? Is the eye cover 3d printed, or do you just mill the stock cover as if it's just the body and use the original eblade eye covers? (I do have a metal eblade eye cover).

[Alexndl]

id be happy to help! let me know if you have any questions.

We need pictures of this "e-rection" cocker

[Ghille-Man]

Here she is 😎

[superman]

I still have a midblock stealth body available. Needs ano, but is not drilled.

[Lotus]

Does this require any modification besides drilling for eyes to work with my goal? I am unfamiliar with the compatibility of Inception bodies.

[superman]

It should work. It is not an inception body. it is a machined 2k+ rj paintball body.

[Lotus]

I'm interested. How much are you asking, and is that feedneck empire spec?

[Ghille-Man]

id be happy to help! let me know if you have any questions.

You have to tap/thread the empire body to allow old school frames to mount up. It's just the rear mount that doesn't line up, front is fine. I had to drill out the front screw hole on the inside of the frame a bit so the empire body sits flush. I'm assuming you have the frame/board/clapper noid. You'll just need a cocking noid and a new ASA since the empire asa will not work on the old frame. I'd say around 150$ for noid, eye, and asa. A buddy of mine designed and I tested eye covers as well as a frame extension for the rear to match up flush with the body as the old frames are a bit shorter. They are 3D printed so I can't imagine my buddy would charge much for them. This has to be hands down my favorite build. My goal was to make it look as "factory" as possible.

[Lotus]

You have to tap/thread the empire body to allow old school frames to mount up. It's just the rear mount that doesn't line up, front is fine. I had to drill out the front screw hole on the inside of the frame a bit so the empire body sits flush. I'm assuming you have the frame/board/clapper noid. You'll just need a cocking noid and a new ASA since the empire asa will not work on the old frame. I'd say around 150$ for noid, eye, and asa. A buddy of mine designed and I tested eye covers as well as a frame extension for the rear to match up flush with the body as the old frames are a bit shorter. They are 3D printed so I can't imagine my buddy would charge much for them. This has to be hands down my favorite build. My goal was to make it look as "factory" as possible.

I have everything already for my current project plus a Resurrection, but the body is just not what I want and I also prefer the pneus of the resurrection. Assuming I shipped you two complete cockers, a non-working (never tuned it, but parts individually are working) blind ebladed superbolt (can provide pics), a resurrection, and the eye, how much would this cost me to get back the completed ebladed resurrection (assuming nothing of mine broke)? Do I also need a karnivore front block to make this work or does the stock Resurrection front block work? I prefer a fully vertical regulator if I can.

[Ghille-Man]

I have everything already for my current project plus a Resurrection, but the body is just not what I want and I also prefer the pneus of the resurrection. Assuming I shipped you two complete cockers, a non-working (never tuned it, but parts individually are working) blind ebladed superbolt (can provide pics), a resurrection, and the eye, how much would this cost me to get back the completed ebladed resurrection (assuming nothing of mine broke)? Do I also need a karnivore front block to make this work or does the stock Resurrection front block work? I prefer a fully vertical regulator if I can.

Stock front block would work fine and if it wasn't for the fact that I am in the middle of a home remodel, i would be happy to help. Hit up Dillan Masellas at Cockertop, he does great work on cockers and we are good friends. He would be the man to do it. In fact, he contacted me recently asking about the details on building one. He has all the knowledge and resources now to duplicate my build. Tell him Troy sent you and we will take good care of you.