Paintball STL Repository

[dozernaut]

I made a trigger and eye covers for the Etha 3. I have the OOPs but don't trust printed plastic to hold up.

[macaco]

I just added a Tippmann ball detent (https://www.thingiverse.com/thing:5880845), to be printed in TPU

[Brianeric26]

Pump automag https://www.printables.com/model/485...tomag-pump-kit

[BandAidFTW]

I didn’t design these, but they are neat

Emek / Etha2 body kits by Muddy Bloody Factory - I printed one of these and it turned out alright, needed some sanding and force to get it on https://www.printables.com/model/149...by-muddy-blood

[DieManInTheRough]

Stockclass Spyder Threaded Trracer body: https://www.thingiverse.com/thing:6113800
Reuploaded to fix missing hole.
Empire Trracer Velocity adjuster: https://www.thingiverse.com/thing:6113847

[OpusX]

WGP Trilogy Autococker LPR hose retention ring. I am the original designer and am releasing this into the wild for all purposes. Please feel free to seed this on your own Thingiverse/Printables/Cults3D/etc accounts, I don't feel like making accounts.

[Tedi1997]

This thread is intended for the sharing of STL files created by the MCB community for use in paintball. Please note that this is not a B/S/T thread. All posted files should be free of charge and are not to be printed for profit.

I'll get the ball rolling with the models I've created so far.

• 8" Freak Bored Autococker Barrel
• 9" Freak Bored Autococker Barrel
• 10-Round Tube Speed Loader w/ Button
• 13/3000 Tank Stock (Remix)
• Autococker to Sheridan Frame Adapter (Single Hole Frames)
• MCS Helix Magazine Follower Bottom
• Milsig Squarehead Magazine Follower
• Milsig Squarehead Magazine Speed Loader (Basic)
• Milsig Squarehead Magazine Speed Loader (w/ Button)
• Nelspot 007 Pump Handle
• Sheridan PGP Pump Handle (Printed Threads)
• Sheridan PGP Pump Handle (Threaded Brass Insert)
• Sheridan PGP2 Extended Feed Plug (Reinforced)
• Sheridan PGP2 Front Feed Cap & Sight
• Sheridan PGP2 Loudener / Ray Gun Tip
• Sheridan PGP2 Ported Barrel Tip
• Sheridan PGP2 Rear Sight

Hey this is a couple years late but I have a question to ask. I printed the 8 inch barrel you've made but unfortunately the insert bore is a tad too tight. I experimented around in cura and at 2% higher x and y size the insert fits freely (maybe even 1.5% would be fine and a bit more snug as now it is free moving). But the increased size makes it so that the threads are too big and they won't screw in the marker anymore. Currenty the inside bore is around 19mm and maybe something along the lines of 19.25mm should be good imo. Is there a chance you can adapt this so it fits?

Thanks in advance

Edit: So I had my brother in law who knows more than me take a look and he made a version with a 19.25mm inner bore. I'll print it and test it and if it works I will post it as a remix to your file.

[JonM]

The version I printed worked for me. The main issue I've seen with some people trying to print this mostly comes down to print tolerances and post processing. What works well for my printer may be slightly different for yours if it's not dialed in the same way (see the variances people get when printing calibration cubes). This is further compounded by the tight tolerances needed to accurately print Cocker threads. My suggestion would be to sand your inside diameter smooth and test fit your inserts.

[RAZRBAKK]

Hey Tedi1997, how did this workout for you? Something you might want to look at is your horizontal hole expansion settings in your slicer. At least, that's what its called in Cura, not sure if you use another slicer. I'll dig up the calibration print I used to set mine.

[Georgie]

CCI Phantom Horizontal Feed

https://www.printables.com/model/585749-cci-phantom-stock-class-part-9011-horizontal-feed

[RAZRBAKK]

Wow, that one is well designed.

[Levi]

Q-Tools for Q-Loader pods. More info in my Q-Loader thread: https://www.mcarterbrown.com/forum/c...-actually-work

[ATTACH]n467145[/ATTACH]

[JonM]

By request, I'm posting my horizontal foregrip for AGD classic rails.

https://www.thingiverse.com/thing:6338271

[OpusX]

Cocker pump handle

https://www.tinkercad.com/things/h82AkjAOKUr-prostock-id-rod-pump

[BLACKHAWK6901]

I know this is a bit random. But I'm kind of surprised its not in here. Does anyone have a good file for a folding marker stand? I found one on Thangs but it calls for a bunch of little parts that have to be glued on, I have a team mate thats looking for one and asked me if I could print one for her.

[JonM]

Personally, I never bothered to design one because PVC pipe is so affordable and significantly sturdier.

[BLACKHAWK6901]

Thats been my go to for years as well. But she wants a folding one that is in a color blue that she likes. Been trying to design one on Tinkercad and it's not the best thing for intricate designs.

[The Inflicted]

Here's some of the stuff I designed:

Crosman 357/Vigilante .50 Cal Conversion

How well does this shoot, velocity-wise?
Would it be possible to modify the design to fit little brass barrels made from .50 brass tubing, like the Sellswords Kaos uses?

[devilzcall]

Pretty sure fitting brass wouldn't be a problem. Velocity wise, I can't really say. I don't think my 357 seals very well, a newly bought vigilante might do a lot better. Tbh I don't even own .50 cal paint, i made this for firing nerf darts

[The Inflicted]

I had a lot of fun with my Kaos revolver for a while but the biggest issue was paint breakage as it made the jump from cylinder to barrel. A pepperbox design would fix that, but I'm guessing some trial-and-error might be necessary to achieve 280fps reliably.

If I had a printer I'd love to see what could possibly be done in making a 5-shot .68 pepperbox using freak inserts.

https://youtu.be/8CLDy8GM9eA?si=KeymVdvTpB8ZpVnm

[Brandon]

anyone have the STL for the Emek Ripper body? I saw it on thingy a while ago but I cannot locate it anywhere anymore.

[OpusX]

https://www.printables.com/model/149761-ripster-and-tripper-emek-etha2-body-by-muddy-blood

[DieManInTheRough]

Remixed Hopper Conversion for TipX, currently don't have a TipX for testing, this is for a future magfed project.

https://www.thingiverse.com/thing:6765718