-
Originally posted by Chuck E Ducky:
“You don’t need a safety keep your booger hook on the bang switch.“
My Feedback Thread -
Printed Magfed body for Tippmann X7 Phenom
LinkOriginally posted by Chuck E Ducky:
“You don’t need a safety keep your booger hook on the bang switch.“
My Feedback ThreadComment
-
Barrel scraper for that stuck on sludge. barrel scraper (paintball) by bluyben - MakerWorldComment
-
https://www.printables.com/model/123...le-snatch-grip
Hey folks, I came up with a quick snatch grip model last night. its for free on my printables
You do not have permission to view this gallery.
This gallery has 1 photos.Comment
-
-
Has anyone 3d printed a shell replacement for the halo b/invert reloader too etc hopper line?Comment
-
The closest to this I've seen is the Inception Designs Pico Loader (https://www.zdspb.com/tech/misc/cadf...t/loaders.html).
-
You do not have permission to view this gallery.
This gallery has 2 photos.Comment
-
Tippmann 68 Carbine Foregrip.
https://makerworld.com/en/models/215...fileId-2339653
The tab that the front body bolt is designed to go thru keeps it loosely fitted to the front of the marker. However, there are two holes in the underside I added for 1/4-20 SOFT tip set screws to be added for a more secure fit. I have yet to test this method beyond threading the holes. That is the reason I left this bit of info out of the model on Makerworld. If you opt to use the set screw holes you may risk damaging your barrel, so do this at your own risk.You do not have permission to view this gallery.
This gallery has 2 photos.Comment
-
Feedback
www.PhrameworkDesigns.com < Nelspot, Sterling, and Phantom parts, plus the occasional big project.Comment
-
Comment
-
I know a few people have asked for these over the years, and i've held them hostage long enough!
JT ER2 and ER2s Freak insert parts:
https://makerworld.com/en/models/253...-adapter-parts
Rainmaker's feedback: https://www.mcarterbrown.com/forum/b...maker-feedback
Comment
-
Cross-posted on thingiverse ( https://www.thingiverse.com/thing:7318494 )
I think i will stick with thingiverse for paintball stuffs
-
-
I got tired of my O-rings migrating under the removable dividers and created these boxes to fit a Plano 3771-00 CDS tackle/organizer box. These keep all my seals and small parts nicely contained and easy to access.
20260509_130929.jpg
20260509_130955.jpg
20260509_130709.jpg
Files are currently posted on:Last edited by Levi; 05-12-2026, 11:48 PM.Comment
-
Thanks for sharing! I remember drooling over this at SuperGame -
You're welcome! Let me know how it works on your printer. I know dutchcommando and probably a couple others were eyeing these as well.
-
-
Replacement Revy Lid available in 3MF and STL posted to Makerworld
https://makerworld.com/en/models/306...ion-loader-lid
Update* - Added in a profile where the flip-lip is on the bottom, as normal. It does take some supports removal efforts, but nothing 'too' crazy. ASA and PC profiles addedLast edited by romeoecho84; 07-20-2026, 10:14 PM.Comment
-
Hey guys I just modeled some standard over the barrel CCI Phantom pump handles. I no longer have a phantom to fit test them. I am working on some custom designs that will match some common anno patterns on phantoms but I want to make sure the measurements are right before I get too far. If anyone is down to print them and give it a shot here is the link to my Makerworld account ( https://makerworld.com/en/models/333...fileId-3792955 ). Let me know if you guys have any questions. I tried to make them as close to OEM as possible without actually having the part in my hand.Comment
-
Designed a quick and dirty 1.5° direct mount picatinny rail for PMI Trracer and other markers with 1" body tube, 2.75" hole spacing for rail mounts.
https://www.thingiverse.com/thing:7433453
Comment
Comment