POP Contest - KMDPB entry

[Rusty Brass]

That's not a pile of poo, dude. That's the $h!t. Nicely done.

[moving_target]

Holy shit
don't think I've seen somebody cast their own frame before

[OpusX]

I do like that single finger 86 spyder frame. Well done.

[MrKittyCatMeowFace]

You really made something cool here.

[KMDPB]

Updates...
So I have designed a sled for the bolt which the pump rod will attach to, I have printed it out and sprued it up ready for lost pla ceramic shell casting in aluminum. I have also finished turning down the pump arm, or rod idk which is which lol I also slightly bored out the pump arm to add more volume for trying to go low pressure.
https://imgur.com/hQpfrOB
https://imgur.com/3WT4TW1
https://imgur.com/NbyMxTU
https://imgur.com/d9poRRx
https://imgur.com/W8FtmMo

[JeeperCreeper]

Your project is coming along very nicely. I definitely need a 3d printer in my life

[KMDPB]

So I have finished up the sled, cut the bolt down and cast smoke pump handle and grip panels. I have powder coated the frame. Now I just have design an adapter to attach the pump to the sled, I have drilled and tapped the sled but theres not quite enough meat on the pump handle for a direct connection. Other than that I have to anno and should be done!

Sent from my SM-N950U using Tapatalk

[KMDPB]

So this weekend if finished the back plate for the pump handle and tapped the stainless rod for the linkage.

Sent from my SM-N950U using Tapatalk

[KMDPB]

Finished up the build, sorry I didnt document some of the final parts, have been busy and had to rush to finish it up before the deadline. I slotted the hammer/striker, welded the cup seal, and annod the body and front block. Total spent was $51.94 for the barrel, stainless rod, and lp spring kit.

Sent from my SM-N950U using Tapatalk

[nobbie333]

Next time can you make one hoseless